These were called Square 8 Plus and were made in Italy. The originals were Square 8's made in England with at least 3 different versions I believe. Unfortunately Ford never changed the part number though. I needed one back in 1979 and this is what Ford was supplying by then.
- Welcome to SAAC Forum.
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
#31
Concours Talk / Re: NOS fog light? C8ZZ 15200 D Lucas later service part?
January 05, 2022, 06:51:40 AM #32
SAAC Forum Discussion Area / Re: 1968 HiPo 289 Mustang Fuel Pump
December 31, 2021, 10:45:49 AM
As of June of 1967, a '68 289 Hipo was still set for release when this information was published. Guess it was canceled shortly after by the X!
#34
Up For Auction / Early '67 hipo block on Ebay
September 19, 2021, 09:31:49 AM
No affiliation. VIN is 7R02xxxxxx. I believe this is most likely an early GT-350 block. Hopefully someone can confirm it.
https://www.ebay.com/itm/234194506442?_trksid=p2485497.m4902.l9144
Moderator Note - VIN not appropriate to post
https://www.ebay.com/itm/234194506442?_trksid=p2485497.m4902.l9144
Moderator Note - VIN not appropriate to post
#35
The Board Room / Re: Scammed by a sac member
June 16, 2021, 08:27:56 AM
He contacted me too for a couple of wanted ads I posted. Probably went right down the line of wanted ads on his fishing expedition. Thankfully it smelled too fishy to me. Also his poor grammar put up a red flag too.
#36
Wanted to Buy / Wanted to Buy / Wanted 289HP Main Caps & 3-C3OZ-6500-A Solid Lifters
May 30, 2021, 02:46:32 PM
In need of a set of 289 hipo main caps. Also need 3 C3OZ-6500-A solid lifters to complete a set. Thanks in advance.
#37
Wanted to Buy / WTB: NOS 289 hipo lifters
April 22, 2021, 08:54:53 PM
WTB: NOS Ford 289 hipo lifters C3OZ-6500-A. Not interested in later versions. Please let me know quantity and price. Thanks in advance
#38
Up For Auction / Re: Lighted SAI sign
April 03, 2021, 07:46:29 AM
I would say most if not all of his signs are reproductions. If you look at his description, it is very misleading to an unsuspecting buyer. People pay good money for signs that never existed back in the day or aren't even right. One example is his "Shelby America" titled sign. From what I've read too, they're not even that well made. Genuine signs would go for much more than he is getting.
#39
1967 Shelby GT350/500 / Re: ’67 Flat Gas Cap Emblem – Got ‘em or Not?
January 03, 2021, 12:23:12 PM
Car #60 did have a flat gas cap when Joe Bopp purchased it. I believe he put the later style cap on it when the car was painted, due to the fact that there was no flat cap emblem available.
#40
1969-1970 Shelby GT350/500 / Re: Carburetor spacer GT 350
December 30, 2020, 01:44:13 PM
Does anyone know the original Ford part number for these?
#42
Wanted to Buy / Wanted: Late ‘66 - early ‘67 S2MS Cobra Intake Manifold
November 14, 2020, 08:42:21 AM
Looking for a late '66 to early '67 original large letter Cobra S2MS intake manifold. Should have firing order on front runner and no extra bolt holes on rear runner. Slash cut on Cobra name too. Have possible trades of later '67 S2MS intake and original Cobra oil pan.
#43
Concours Talk / Re: Any pictures of an original fuel pump as used on original Paxton cars?
October 14, 2020, 07:09:15 PM
Here's one I've had for 35+ years. It's a 3509-S. Not sure if it's original, but I believe Shelby sold it under part #S7MK-9350-A
#44
New Jersey Region SAAC / Re: Time to Say Goodbye!
August 12, 2020, 11:54:34 AM
Best of luck Bob to you and your family!
Thanks for your help through the years with our local club too.
Thanks for your help through the years with our local club too.
#45
Parts For Sale / Re: NOS 68 Shelby front side marker lamp retainers
July 14, 2020, 10:12:32 PM
Here's some pictures