Rear Brake Self Adjuster Question

[SHELB66]

I'm finally getting around to doing the rear brakes on my '66 and have a question regarding the rear self adjusters.  The hardware kits come with a washer which I know they should.  The kit I have for the left driver side has a curved spring loaded washer while the kit I have for the right side contains a flat washer.  Is it correct to have 2 different types?  The old adjuster from the left, which is the side I'm working on, has no washer at all!  Any help would be greatly appreciated.

Craig R.

[Lincoln tech]

Are you talking about the washer that sits under horseshoe clip that attaches parking brake pawl to the brake shoe ?? if so they were always curved.

[SHELB66]

According to the Ford manual there is a washer on the adjuster itself just behind the removable slotted end cap or "socket".

Craig R.

[SHELB66]

Problem solved!  Found correct "missing" washer in another bag.  Back to work!  Thanks again!

Craig R.

[Lincoln tech]

According to the Ford manual there is a washer on the adjuster itself just behind the removable slotted end cap or "socket".

Craig R.

That one would always be flat

[SHELB66]

^^^^ PM sent

Craig R.