SAAC Member Badges are NOW available. Make your request through to validate membership.

Main Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Topics - Dennis Y

1969-1970 Shelby GT350/500 / Axle question
February 07, 2024, 08:45:16 PM
Are 69 GT 350s 28 or 31 spline axles?
1969-1970 Shelby GT350/500 / Gravel Guard question
January 15, 2024, 05:48:25 PM
For the studs on the gravel guard, are these just bolts threaded thru from the other side then cut and welded? I can see a dimple on the opposite side. I think both of mine are snapped. Thanks
Is there more than 1 manufacturer of this piece or are they all made by the same vendor? (Referring to the repops)
I'm going out on Saturday to see if Ben's Boss sells, if anyone wants to ride along. Leaving around 6:00 a.m. Could meet somewhere along 22 or 78. Tickets are $10 cheaper $20 vs $30) if you purchase online before 11:59 p.m. tomorrow night (Tuesday).
Preview of Ben's Boss -
If interested, give me a call - 610-five5four-0923.
1969-1970 Shelby GT350/500 / Hood Seal
June 22, 2023, 11:27:52 AM
I know there is a difference in the heigth of the seal between GT350 and GT500. Is there a difference in the diameter also and if so is just the air cleaner base different or is thwe air chamber different between the two also? Thanks!
I see a number of these intakes tapped at a boss at the rear of of the carb mounting area for a vacuum line. Mine is not so I wonder which is correct or was there a running change? Car #0361. Thanks, Dennis
SAAC Forum Discussion Area / plastic bead blasting
January 09, 2023, 08:43:43 PM
Does anyone have any experience with American Dry Stripping in Milford CT.? I am contemplating using them to strip all the fiberglass pieces from my car. Between remnants of the metal flake, and whatever they used to prep it to turn it back to a normal paint job, I could be scraping for a long time in some areas. From what I've read, the reviews look good but wondered if any one on here has used them or know someone that has.
1969-1970 Shelby GT350/500 / Sway bar brackets?
December 27, 2022, 10:41:18 AM
Is it a safe assumption these are from an aftermarket sway bar?
1969-1970 Shelby GT350/500 / front fender lower section
December 04, 2022, 11:29:26 AM
Has anyone used the above mentioned item from Branda and if so what's your thoughts on fit and finish?
1969-1970 Shelby GT350/500 / Antenna location
August 30, 2022, 07:57:47 PM
Are there any set measurements for the location of the hole for the antenna on the LR quarter panel? Thanks.
SAAC Forum Discussion Area / Info on '69 #0361
July 07, 2021, 10:21:47 PM
Looking for info, previous owner name, background on 0361 especially story behind the traces of silver metal flake (not metallic, think vw dune buggies) found during tear down. This along with the traction bars and signs of what may have been wheels flares makes me think it may have been doing the quarter mile shuffle back in the 70s. Was evidently hit in rear in early 70s based on dates on labels on replacement parts used to repair. Have not been able to find anything on original owner E.M. Block from New Jersey. 2nd owner unknown but thought to be from PA. Spoke to who whom I believe to be the 3rd owner as the person I purchased from had held it with an open title. Any info or stories greatly appreciated. Tried to upload pics but received message the folder was full. Will try again when that is corrected. Thanks, Dennis
Is there a spanner socket to fit the console switches?