News:

SAAC Member Badges are NOW available. Make your request through https://saac.wildapricot.org  to validate membership.

Main Menu

Axle question

Started by Dennis Y, February 07, 2024, 08:45:16 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Dennis Y

February 07, 2024, 08:45:16 PM
Are 69 GT 350s 28 or 31 spline axles?

Coralsnake

#1
February 08, 2024, 06:51:04 AM
All 1969 GT350 rear axles were 28 splines.

They came as 3.00 and 3.25 ratios in both open and traction-lok .

WES-AB -traction-lok

WES-AC -open

Shelby Historian. Check out theCoralsnake.com

I'm looking for 9F02M480004. Have you seen it?

shelbymann1970

#2
February 08, 2024, 07:36:25 AM
Quote from: Dennis Y on February 07, 2024, 08:45:16 PM
Are 69 GT 350s 28 or 31 spline axles?
You could of asked me that question Dennis.  ;)
Shelby owner since 1984
SAAC member since 1990
1970 GT350 4 speed(owned since 1985).
  MCA gold 2003(not anymore)
1969 Mach1 428SCJ 4 speed R-code (owned since 2013)
"2nd" owner of 68 GT500 #1626

FL SAAC

#3
February 08, 2024, 07:43:29 AM
All 1969-70 GT350's had a 9 inch rear end.

1969/70 GT350 had 28 spline rear axles and the GT500 had 31 splines.

If still in place the tag on the differential will have all the Information

I hope this helps.
When you arise in the morning, think of what a precious privilege it is to be alive to breathe, to think, to enjoy, to love.

Home of the Amazing Hertz 3+1 Musketeers

I have all UNGOLD cars

Not a SHELBY expert

Imitation is the sincerest form of flattery that mediocrity can pay to greatness.

Tomdeg

#4
February 08, 2024, 07:45:23 AM
We're the cases standard or nodular?

shelbymann1970

#5
February 08, 2024, 07:48:03 AM
Quote from: Tomdeg on February 08, 2024, 07:45:23 AM
We're the cases standard or nodular?
standard on GT350
Shelby owner since 1984
SAAC member since 1990
1970 GT350 4 speed(owned since 1985).
  MCA gold 2003(not anymore)
1969 Mach1 428SCJ 4 speed R-code (owned since 2013)
"2nd" owner of 68 GT500 #1626
Print
Go Up Pages1
User actions