Topics

Looking for a decent one that doesn't have a plug in the vacuum switch port.

Thanks
Adrian Jacobs

What is correct color for the roll bar covers in a black interior gt500.

Black or the dark charcoal color ?

Thanks

Is there point deduction in Division 2 if using York compressor on 69/70 gt500 ? 

Thanks

Just got these antenna support parts from Ed.  He mentioned OK for me to post pics.  And that he has a few more of these he'd consider selling.

Adrian Jacobs

Looking for original style, single screw type dashpot bracket correct for 69 GT500 automatic.   For a C9AF N carb

Also looking for correct dash pot

Thanks
Adrian Jacobs

$400.  Local pickup.  45 minutes west of Ft Worth.  PM if interested

I'd like to hear expert opinions about the antenna in these photos.  Specifically the antenna that i've labeled as "maybe original".    The other antenna in the photos i recently bought from ebay vendor that routinely sells inoperative (but nice) version of the original.   Also i'd like to hear opinions re: the coax cable.   Thanks

I'm looking for some new ones. PM me if you have some.   Thanks

Am i correct that this hole in the upper trunk rail area should not be here.   Just want to confirm before body guy fills it. 

Owned car since '79 and i didn't put it there.  Can't imagine why anyone would.

Thanks

Does this appear to be correct for 69/70 ?  Thanks.

Looking for nice 69/70 mustang NOS lower door hinges

Car is headed to media blaster and I'd like to hear thoughts/comments from experts about removing the VIN tag from cowl.

And are there particular rivets that are used to reattach the VIN ?  This is a 70 model so the VIN tag so I'm not sure if that meant a specific rivet was used during the re-VIN process.

The fellow doing metal work says he commonly removes/replaces VIN tag.  He specializes in 65-70 mustangs and has worked on a number Boss 429/302 and Shelbys in the past.   He's advising it's a non-issue to remove VIN tag for safe keeping while car is being blasted/primed/painted.   I trust him...but want to verify.

If this is standard practice,  I'll remove tag myself before delivering car.

Thanks   

Primarily interested in passenger side but have some interest in driver side as well.  Thanks

For the 1970 Gt500 automatics cars:   During the 69-to-70 conversion,  was the existing "born-with" carb modified...or rather was a replacement carb swapped out in place of the original carb ?

My understanding is the distributor was a swap-out scenario, but I can't seem to specifics on how the carb mod was executed (i.e. carb swap vs. carb mod).   

Knowing this would help me determine appropriate date code for my 02/28/69 built 70 GT500 auto.   Trying to determine whether to be in the ballpark of a 91_ date versus 97_ date.     



Thanks
Adrian   

Looking for nice set NOS beltline weatherstrips for 69/70 fastback.  Interested in any of the following:

C9ZZ-6521456
C9ZZ-6521457

C9ZZ-6321452
C9ZZ-6321453

D0ZZ-6321452
D0ZZ-6321453

What are opinions of repop door pull cups vs original ?  Both mine are busted at the typical weak spot. Wonder if repops might be equal or better than original (durability wise).  If not I'll chase down some originals.   >edit> I now understand the difference length between 69 and 70 pull cups.

I'm soon sending door panels to Gene Painter and want to send a good set of pulls.  So looking for advice.

Thanks
Adrian

sold

Anyone have tips/method/suggestion for way to remove rear fastback glass without damaging the rubber window seal?   If possible, id like to save/reuse the original rubber seal.

Looking at it,  wondering if better to pull glass out of seal (somehow) or perhaps possible to pull glass and seal together.

Thanks
Adrian Jacobs

Any recommendations for place/person that restores 69/70 auto shifter handle?

Wondering if the 69/70's 500s typically had N or non-N carrier

Also curious about typical date codes. Mine currently has 8D24 dated, non-N nodular carrier in car built Feb 69.  Seems a bit early for car's build date (10 months ?).

Back in the early '80's used to swap in/out various 3rd members in the car   Wondering if I might have lost track of the original over the years.  Hoping I had the correct one the car as I was selling off all my extra parts 30 years ago.