Messages

Found Thanks

To clarify a 351W or 351C car is what I'm interested in.  Thanks

Hi - I'm looking for a used 289 Cobra T pan.  I'm not interested in an original just good quality reproduction.

Thanks

Dougs make a very nice product

PM sent

Hi all,

I'm looking for a 1970 Mach 1.  No projects or big blocks


Thanks

I recall Jim Cowles doing a starter for me years ago with the ink stamp.  Wasnt sure on the physical stamping of this part or application.  Bob - you are correct the nose cone is marked D3

Here is what I have not sure if correct for 67 Shelby GT350. 

I may have one do we know the stamping that should be on it?

Interesting positioning of the bullet mirror on the driver's side.  Hey, if it works, do it.

Perfect spot for racing along with not trying to see over the rear quarter

Do they keep running when switch is turned off?  Pretty simple mechanical setup with the articulation of the arms.  I'd look at the switch for replacement and confirm the arms are operating as designed.

I'm good now but if you have perfect grade 9-10 I'm interested for future projects. Let me know via PM and date range is not important. I have about 7 original ranging from 5-7 out of 10 in my opinion.  Will be selling off soon.

Yes Bob certainly etched on the inside.  This was another issue I had with the supplier they etched on the outside

Pictures of the results

I purchased glass from Kentucky Mustang they buy by the pallet.  They were kind enough to go into the warehouse look at the inventory, send me pictures, and discuss condition over the phone.  Excellent customer service! Once I received the glass I used ArmorEtch to get the center line etched into the glass. I will be generating my own Carlite logo and etching as well. 

Thanks Kentucky Mustang and Bill Collins for transporting from Columbus