Transmission Inspection Cover For '67 With A 289 4 Speed Wanted

[Fast Fords]

Looking for a transmission inspection cover for 67 Mustang with a 289 hipo 4 speed car. Email gandcmurphy@rogers.com if you can help. Thanks for any help.

[J_Speegle]

Small blocks with manuals had a one piece (not separate inspection plate or hole) engine plate that separated the engine and transmission bell housing. Is that what you are searching for?

[Bob Gaines]

Small blocks with manuals had a one piece (not separate inspection plate or hole) engine plate that separated the engine and transmission bell housing. Is that what you are searching for?

He might be confusing it with the automatic inspection cover that bolts to the different automatic block plate .

[Road Reptile]

Hi folks,
Maybe you are looking for the top cover for a top loader transmission??
If so David Kee makes a nice reproduction. Inspection cover makes most of us think of the flywheel cover that is used on an FE equipped 4 speed.Hope this helps.
R.R.

[Fast Fords]

I am not exactly sure what I am looking for. I have a 67 Mustang with a K code 4 speed tranny. Do I need an inspection plate cover or do I need the large plate that separates the transmission and the motor? Any help is appreciated. Thanks.

[Bob Gaines]

I am not exactly sure what I am looking for. I have a 67 Mustang with a K code 4 speed tranny. Do I need an inspection plate cover or do I need the large plate that separates the transmission and the motor? Any help is appreciated. Thanks.

For the 67 K code 4 speed you need the block plate that goes between the bell housing and the block. Other then the hole for the crank and starter it is a solid plate.

[FL SAAC]

Looking for a transmission inspection cover for 67 Mustang with a 289 hipo 4 speed car. Email gandcmurphy@rogers.com if you can help. Thanks for any help.

Contact Dan William's in the Carolinas

Haven't spoke to him in a few years, but he had everything and anything to do with top loaders.  Also anything F O R D

attached is his phone number from our contacts

Best of luck on your endeavors!

[J_Speegle]

Something like this

[Fast Fords]

Thanks for the info guys and thanks for the picture Jeff. I will try to call him tomorrow FL SAAC and see if he might be able to help me out. Thanks again.

[FL SAAC]

Thanks for the info guys and thanks for the picture Jeff. I will try to call him tomorrow FL SAAC and see if he might be able to help me out. Thanks again.

Danny is "not" a morning person call him tonight or tomorrow any time after 3 or 4 p.m.

Best of luck