News:

We have implemented a Photo Gallery for hosting images right here on SAACFORUM. Check the How-To in News from HQ

Main Menu

1967 Deluxe Seatback Repair

Started by greekz, October 21, 2023, 03:52:44 PM

Previous topic - Next topic

greekz

I noticed a small vertical crack on my drivers seatback.  I thought there was a thread on someone who repairs the seatbacks.  I did a search and came up empty.  Does someone know of a company/person that repairs seatbacks?

Thanks,

Greek
SFM 6S1134  '67 GT-350 #2339

martyjac

Larry Zobeck did mine. Also repairs fastback rear side interior panels. He's located in Michigan.

rcgt350

If you do get it repaired, you still have to be very careful when fastening the panel, if there are any areas that can get stressed theses panels seem to crack easily

JD

Did a repair on one similar to what you seem to have, use JB Weld and thin wood strip on the back.  Have to rough-up the surface (on the back-side) and make sure the crack is closed-up.

If the crack on the outside is still needing attention, tooth pick with some JB Weld to fill-in the crack and shape/contour immediately and then color with paint or black sharpie, burnish lightly to correct sheen.
'67 Shelby Headlight Bucket Grommets https://www.saacforum.com/index.php?topic=254.0
'67 Shelby Lower Grille Edge Protective Strip https://www.saacforum.com/index.php?topic=1237.0

greekz

Thank you for the suggestions guys.

My crack is at the top starting at the metal trim and running downward for about an inch and one half.

I will give Larry a call.

Greek
SFM 6S1134  '67 GT-350 #2339