News:

We have implemented a Photo Gallery for hosting images right here on SAACFORUM. Check the How-To in News from HQ

Main Menu

Has anyone installed a car lift for storage/ car repairs and would recommend it?

Started by Tinface, March 18, 2018, 03:49:05 AM

Previous topic - Next topic

Tinface

Gentleman,

I have very limited space at my house in the city: a 2 car driveway/ one car garage/ and one car carport with a garage door. Yes. It does suck. So I need to make the most of it until I move in a few years.

I am considering a 4 post lift so I can raise my GT350 up and drive another car I need inside underneath it, or pull the lower car out and work under the car on the lift. There are a bunch of lifts out there out now. I need a 4 post lift I believe.

Has anyone purchased a lift and set one up (or had something else set it up) and would recommend it? Or perhaps you don't like the lift you have and I should avoid it?

My measurements are really tight:

Height limitation: Their is a beam that is 9 (108") foot from the concrete the lift would sit on.
Width Limitation: The carport is 9 foot wide (108 ")
Length limitation:and 16 feet long(192")

That's roughly the size that the lift can be.

Thank you for your time.

Mark



98SVT - was 06GT

A friend has one. Loves it. I'll borrow it if I need to do trans or exhaust work. I've kicked around getting one to put my mill, lathe and eelding stuff on to free up some space. Leno put about 10 in just for the storage space. Make sure to order the drip pan and sliding jack support so you can take a wheel off on the lift.
Previous owner 6S843 - GT350H & 68 GT500 Convert #135.
Mine: GT1 Mustang, 1998 SVT 32V, 1929 Model A Coupe, Wife's: 2004 Tbird
Member since 1975 - priceless

Bigfoot

Rotary makes a great lift. It's a Global company within a Fortune 500 Company.
The parent Company is Dover Corp.

I'm not sure on dimensions but you can google it.  Many varieties.

You don't want one of the cheap ones made overseas...
Remember,..you will be standing under it....
You get what you pay for.

RIP KIWI
RIP KIWI

Ldouble619

I have a four post lift with a 10.5ft ceiling, yours will be tight with 9ft and two cars.

Backyard bubby makes a good made in USA lift

http://backyardbuddy.com/lifts/

Greg

I give Wildfire lifts a BIG thumbs up.  I researched them all and decided to buy theirs for many reasons as it is a great lift with easy set up.  Heavy duty at an affordable price and you wont be sorry going with them.  You also talk and buy directly from the owners.   Call Brad at 763.445.9143
Shelby's and Fords from Day 1

Bob Gaines

Quote from: Tinface on March 18, 2018, 03:49:05 AM
Gentleman,

I have very limited space at my house in the city: a 2 car driveway/ one car garage/ and one car carport with a garage door. Yes. It does suck. So I need to make the most of it until I move in a few years.

I am considering a 4 post lift so I can raise my GT350 up and drive another car I need inside underneath it, or pull the lower car out and work under the car on the lift. There are a bunch of lifts out there out now. I need a 4 post lift I believe.

Has anyone purchased a lift and set one up (or had something else set it up) and would recommend it? Or perhaps you don't like the lift you have and I should avoid it?

My measurements are really tight:

Height limitation: Their is a beam that is 9 (108") foot from the concrete the lift would sit on.
Width Limitation: The carport is 9 foot wide (108 ")
Length limitation:and 16 feet long(192")

That's roughly the size that the lift can be.

Thank you for your time.

Mark
I suppose it would depend on what you planed on parking underneath.Sorry to report that I just measured a 66 GT350 and then lowered a lift with a car on it ( but not one underneath for safety reasons ) to the car height measurement plus inch. The total measurements included the lift platform (all makes are about the same in that respect). The total with the car on top was over 9 ft.  It wasn't even close.  I think that you will find that a 9ft ceiling will not let you park anything but a low profile car underneath if you had a 66 GT350 or equivalent on top. . You could still gain storage for maybe lawn equipment etc. but certainly not two equivalent 66 GT350's .
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

Bob Gaines

Quote from: Bob Gaines on March 18, 2018, 11:04:42 AM
Quote from: Tinface on March 18, 2018, 03:49:05 AM
Gentleman,

I have very limited space at my house in the city: a 2 car driveway/ one car garage/ and one car carport with a garage door. Yes. It does suck. So I need to make the most of it until I move in a few years.

I am considering a 4 post lift so I can raise my GT350 up and drive another car I need inside underneath it, or pull the lower car out and work under the car on the lift. There are a bunch of lifts out there out now. I need a 4 post lift I believe.

Has anyone purchased a lift and set one up (or had something else set it up) and would recommend it? Or perhaps you don't like the lift you have and I should avoid it?

My measurements are really tight:

Height limitation: Their is a beam that is 9 (108") foot from the concrete the lift would sit on.
Width Limitation: The carport is 9 foot wide (108 ")
Length limitation:and 16 feet long(192")

That's roughly the size that the lift can be.

Thank you for your time.

Mark
I suppose it would depend on what you planed on parking underneath.Sorry to report that I just measured a 66 GT350 and then lowered a lift with a car on it ( but not one underneath for safety reasons ) to the car height measurement plus inch. The total measurements included the lift platform (all makes are about the same in that respect). The total with the car on top was over 9 ft.  It wasn't even close.  I think that you will find that a 9ft ceiling will not let you park anything but a low profile car underneath if you had a 66 GT350 or equivalent on top. . You could still gain storage for maybe lawn equipment etc. but certainly not two equivalent 66 GT350's .
I forgot to mention that Direct lifts (what I use) should fit the footprint measurements you gave.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

wcode70

I bought a 9000lb capacity Revolution which is made by Rotary.  Unfortunately it won't fit within the space you have to work with.  Maybe a trimmed down version is available from some manufacturer but they all seem to be about the same size and my posts are basically 10' x 16' center to center.  Below is a link to the model I bought and a picture of my lift.  One of those things you'll wonder how you ever lived without one once you get one.  Good luck!!  Edit...just looked at the Revolution 8000lb lift in the link and it looks like it will fit in your space but unless your other car you want to park underneath is a GT40 I don't think the height will work for you with either lift.

http://www.revolutionlift.com/RFP9-9000-Pound-Capacity-Four-Post-Lift-P2C4.aspx

http://www.revolutionlift.com/RFP8-8000-Pound-Capacity-Four-Post-Lift-P24C4.aspx


1970 BOSS 302 - W code
1970 Mustang Sportsroof - W code
1970 Ranchero GT - 429

papa scoops

lifts are bad. lifts attract pests. they are like your car trailer. everyone wants to borrow it. let them get the lift and you borrow it! phrred

Tinface

Wow. Big help. Thank you so much.

Bob Gains: you measured it for me? Wow. Amazing help. Really.

Thank you all so much.

Mark

Bigfoot

RIP KIWI
RIP KIWI

Grumpy


BGlover67

I know someone who has one of these and loves it.  Price includes delivery and setup.  Sometimes they will run a sale on these and drop the price by $1000!

https://www.costco.com/Challenger-Lifts-4-post-Home-Storage-Automotive-Lift.product.100302337.html

Thanks,
Brian R. Glover
SAAC Carolina's Northern Representative

hertzdonut

I love my Backyard Buddy! Fits Two Mustangs/Shelbys but probably needs 10 foot height. Measure carefully.

Terry

KerryBWhite

I have looked at the Advantage 4 post lift.

Does anyone have any experience with this brand?

https://www.advantagelifts.us/