Gas Tank Install

[Fastback66]

Was there any sealer or anything used between the gas tank lip and body on the 69/70 GT350?

[In The Doghouse]

Strip caulking cord.

[Bob Gaines]

Was there any sealer or anything used between the gas tank lip and body on the 69/70 GT350?

Yes, as mentioned strip caulk. Typically a gray or dark gray color . You can get it from most larger Mustang vendors ,Eastwood, auto paint stores and some better supplied auto parts stores.

[J_Speegle]

If you purchase the thin strips take 3 or 4 of them and work them together in a single thick strip them apply each section around the opening then install the tank. Once compressed this provides a strip about 1/2" or slightly wider like originally done.  And this way you don't see the single strands through the unused holes not used for mounting screws nor around the opening.

[Special Ed]

And dont forget to install grey  caulk strip around filler neck when reinstalling it also after tank is in place.

[Fastback66]

Ok, thanks.

[Fastback66]

Does anyone know where I can find the fuel sending unit wire clips? I've searched a few vendors without luck.

[mr68shelby]

Not sure the exact clips yours needs, but check AMK. They have most everything.

[Fastback66]

Found what I needed at AMK, thank you!