News:

SAAC Member Badges are NOW available. Make your request through https://saac.wildapricot.org  to validate membership.

Main Menu

Air Cleaner Base for KR?

Started by mherman2, November 18, 2026, 11:46:12 PM

Previous topic - Next topic

mherman2

I bought this from Jason Billups, probably 10 years ago. I believe it's the air cleaner base for a 68 Cobra jet or correct for a KR? I believe I bought it when I owned a yellow GT500kr that I sold. I can't remember. Any input would be greatly appreciated.

Coralsnake

#1
Nope, thats the base for a shaker. A KR does not use studs or blue plastic plug and the bottom is flatter
Shelby Historian. Check out theCoralsnake.com

I'm looking for 9F02M480004. Have you seen it?

azdriver

Never seen a shaker base that looks like that one. Interested to find out what it is from.

Pat

Road Reptile

Mike,
May fit a 68 type of ram air like a 135 series car used. Any dates or numbers stamped in to give more clues would help. Hope this helps!
R.R.

Krelboyne

Looks like a 1970 351W base, are the studs OEM?
Scott Behncke - Carchaeologist @ WCCC

Mustang_Charlie

It looks close to the base that was for the shaker from my Torino Cobra w\429.  Hard to say, as I sold that maybe 40 years ago.

mherman2

Quote from: Coralsnake on November 19, 2026, 01:49:03 AMNope, thats the base for a shaker. A KR does not use studs or blue plastic plug and the bottom is flatter

Thank you!!

mherman2

Quote from: Road Reptile on November 19, 2026, 09:22:35 AMMike,
May fit a 68 type of ram air like a 135 series car used. Any dates or numbers stamped in to give more clues would help. Hope this helps!
R.R.

I'll look more closely

mherman2

Quote from: Mustang_Charlie on November 19, 2026, 12:06:53 PMIt looks close to the base that was for the shaker from my Torino Cobra w\429.  Hard to say, as I sold that maybe 40 years ago.

This makes sense, I owned a 429 Torino Cobra twister. I ended up selling it back to the original owners sons. I think I bought this as I was collecting parts to put it back to correct. That could be it:)

mherman2

Quote from: Krelboyne on November 19, 2026, 10:45:52 AMLooks like a 1970 351W base, are the studs OEM?

How would I check for you??

Special Ed

The blue side  plug came out in 1970 for the california fuel evap hose so its 70 -71 era.

rhjanes

Quote from: Special Ed on November 20, 2026, 07:18:40 AMThe blue side  plug came out in 1970 for the california fuel evap hose so its 70 -71 era.
I was thinking that also.  And the hole on the drivers side, I'm not sure what that would have been for.   Then the studs for the top are inside the base.  My 1970 base, they are outside. 
Pirating!  Corporate take-over without the paperwork

Krelboyne

Hole on the driver's side is for a grommet and black elbow for hose to the oil cap.
Scott Behncke - Carchaeologist @ WCCC

rhjanes

Quote from: Krelboyne on November 20, 2026, 12:44:23 PMHole on the driver's side is for a grommet and black elbow for hose to the oil cap.
Thanks.  I'd not noticed that there isn't a neck on the front for the hose to the oil cap.   
Pirating!  Corporate take-over without the paperwork