News:

SAAC Member Badges are NOW available. Make your request through https://saac.wildapricot.org  to validate membership.

Main Menu

original 67 wheel or repo

Started by 65cobra, November 14, 2026, 11:48:14 AM

Previous topic - Next topic

65cobra

I got this with 619, its original looking except its missing the made in italy marking and unfortunately  someone ripped the hub out...

JD

Hello:
I saw your post but I can't "see" the .heic formatted images.  Can you post them as .jpg files or maybe one of the other SAAC members can convert and repost them?

Here is a link to a thread on the forum that touches on this topic;
https://www.saac.com/forum/index.php?topic=25718.msg190427#msg190427

I believe the originals on '67's did have the "Made in Italy".  There were some variations and issues with the originals and some wheels were replaced under warranty and may have received another version from dealer stock.  Another possibility is that company made wheels that may not have had the MADE IN ITALY stamping by accident or a wheel that was not going to be exported?

Do you have any copies of warranty paper work on car #619 specifically the steering wheel?

Perhaps couple other guys will comment as well.

JD
'67 Shelby Headlight Bucket Grommets https://www.saacforum.com/index.php?topic=254.0
'67 Shelby Lower Grille Edge Protective Strip https://www.saacforum.com/index.php?topic=1237.0

TA Coupe

If it starts it's streetable.
Overkill is just enough.

JD

Roy - THANKS that helps!

"65cobra" look at the thread posted above and compare the images in that thread to your wheel.

Also, look at these two images and compare to yours as well:

Can you post some more images (as .jpg) of the center hub on your wheel?  I realize the front side of your center hub is probably damaged but it can help. 

As well as the horn button and measure the "dish" of the wheel too (there was a more shallow version of the same wheel made for use on other cars).
'67 Shelby Headlight Bucket Grommets https://www.saacforum.com/index.php?topic=254.0
'67 Shelby Lower Grille Edge Protective Strip https://www.saacforum.com/index.php?topic=1237.0

65cobra

Thanks TA Coupe, and JD I did see your post you linked, thats kind of what has me thinking its an original wheel.  The EFFPI stamping is the right depth and font, the wires are right, the boot looks right.  This car has been in storage a long time, and retains the majority of its original parts, but unfortunately its in need of a excorcism, It had an engine fire early in its life documented in the warranty info and it had a later engine fire too that didn't burn the hood up to bad but I think that started an underdash wiring fire that burned a lot of stuff, even as far as the shoulder harness is burnt, the roll bar and boot looks okay but the belt it burnt up to the y.

The car is already at the restorers I'll have him take some pics, so we want hub size, diameter and a front picture?

how would one go about fixing this?  for one thing its nice to save an original part and secondly these wheels are not cheap :) 

JD

"65cobra" sorry to hear about the fires!

Yes, the depth of the steering wheel hub and any photos front and back of the horn button and where it fits into the center of the steering wheel.

I certainly understand wanting to fix original parts but fixing the center/inside of that hub could be a REAL challenge, do you have the center splined female "tube" that the steering shaft slides through??
'67 Shelby Headlight Bucket Grommets https://www.saacforum.com/index.php?topic=254.0
'67 Shelby Lower Grille Edge Protective Strip https://www.saacforum.com/index.php?topic=1237.0


65cobra

horn button definitely looks original 

Road Reptile

Hi to all,
After seeing all the evidence pictured, it appears that it could possibly be a genuine wheel....
Yet the risk of it in use after a repair is not worth it. We all know they are expensive. So is the car itself and overall a replacement wheel is worth it for these reasons. I would not take this risk
Think of the loss of steering and what could happen to you or who you hit.
Place an ad in the wanted section and see what happens.
R.R.

JD

#9
The horn Button seems correct is there an actual button front?  (I think you have a GT500 but the example below is a GT350 for reference). What does the side opposite the wires look like?

Also, the image of the side of the hub what does it measure and does it have a segment line/seem? The photo you posted is a bit fuzzy and hard to see.  Look at this photo and note the height and see the seem, does yours have that?

I would agree with "Road Reptile" not saying it couldn't be done but at what cost and is it worth the risk? (Great piece of wall art?)
'67 Shelby Headlight Bucket Grommets https://www.saacforum.com/index.php?topic=254.0
'67 Shelby Lower Grille Edge Protective Strip https://www.saacforum.com/index.php?topic=1237.0

65cobra

yes it has an original gt500 horn button.   the segemented section is what is broken off.  Ill get that measurement

First I would like to determine if its a legit wheel and then decide if its possible to save, and then worth it to save.  It will likely need a donor wheel, of some sort to get the hub.

I think I would rather have some visable welds and the original wheel. I won't be doing anything unsafe to save 3k thats for sure.

that being said I am in the market for a short boot wheel or very damaged wheel I can scavenge the hub off of.

were any repos like this made prior to 2004?   Maybe its a 67 period original effpi wheel not made for a shelby and someone tried to swap the hub?

JD

OK, I thought it looked a bit "short" - Thanks for the clarification - that helps!



'67 Shelby Headlight Bucket Grommets https://www.saacforum.com/index.php?topic=254.0
'67 Shelby Lower Grille Edge Protective Strip https://www.saacforum.com/index.php?topic=1237.0

65cobra

looks like its 1 5/8 exactly like my short boot one in 1395 but your reference one is maybe a 1/16th longer, I guess that could be just in holding the tape.

JD

#13
OK, I was asking about the overall of 2-3/8" like in your second image.  They should both be like that. That's where the porting for the horn contacts are.

A stock Ford Mustang GT steering Wheel might be a source for the center splined portion that slides on the steering shaft.

'67 Shelby Headlight Bucket Grommets https://www.saacforum.com/index.php?topic=254.0
'67 Shelby Lower Grille Edge Protective Strip https://www.saacforum.com/index.php?topic=1237.0