3 NOS FE windage trays

[428kid]

3 NOS Ford windage trays new in the box . Comes with windage tray and two gaskets. In Ford boxes .$150 each shipped lower 48 or knock shipping off and pick up in middle TN.

[Bob Gaines]

There are two types of trays. The 70 tray has notches or cut outs on the side and 69 does not . Which ones are these?

[428kid]

I would say the later , as they carry the later Sticker. I have not opened them though.

[Special Ed]

There are 3 versions of c9zz windage trays early 69 late 69 and 70 with the 2 side cutouts but its more a running change same as the later fe oil pan baffle. The cutout got bigger by the oil pan pickup tube area.

[shelbydoug]

There are 3 versions of c9zz windage trays early 69 late 69 and 70 with the 2 side cutouts but its more a running change same as the later fe oil pan baffle. The cutout got bigger by the oil pan pickup tube area.

Are there advantages to one over the other? I have never heard a discussion of that subject.

[Special Ed]

The 2 side panrail  notches were for the 70  starter j straps routing away from exhaust manifold heat unlike 68-69 when starter cables routed by motot mounts. The windage tray cutouts started smaller then bigger as a running change probly due to oil flow and more dipstick clearance or oil flow to oil adapter etc not sure as the cutout is in the front lh side area.

[TA Coupe]

From the Ford Motorsports catalog.

     Roy

[428kid]

Thanks guys! Its my understanding the slits help drain the oil back to the pan. Years ago  I purchased some from Randy G. RIP , and he had cut larger slots in them for drain back. That's what I used in my engine.