News:

SAAC Member Badges are NOW available. Make your request through https://saac.wildapricot.org  to validate membership.

Main Menu

Wanted original disc brake hose

Started by musclecarman15, June 19, 2026, 11:38:38 PM

Previous topic - Next topic

musclecarman15

In need of an original or nos front passenger side disc brake hose for my 70 Shelby, would prefer date to be prior to February 69, thx Keith

Special Ed

i got some originals i restored or u looking for a unrestored hose?


Special Ed

#3
just found my hoses  got 10 rh sides here  not been  restored. call will see what date codes

68stangcjfb

#4
When you say restored, are they just cleaned up to resemble the original finish only or was a new hose also installed? If a new hose, how did you manage to apply the correct single crimp & get a period correct new hose with proper markings? If the hose is original, are these hoses meant for Thoroughbred cars that primarily get pushed around? I don't trust 30-year-old brake hoses on my driver cars. Let alone 50+ year old ones. Just wondering because I just replaced the original hoses on my friends 69 GT500 4 speed last week (aftermarket hoses, car will be a driver) and I figured they are good for nothing but wall art at this point.
68 1/2 CJ Mustang GT FB auto 3.91s 68 1/2 CJ Torino GT FB 3.91s 60 T Bird 64 Falcon Sprint conv. 4Spd 65 Falcon Sedan Delivery 67 Fairlane 500 SW 428 4Spd, 68 Torino 4dr 95 T Bird SC. 89 F250 2wd, 98 Mustang GT conv. 99 Jeep Cherokee 2002 T Bird. 96 Harley FLSTN Heritage Special 05 Yamaha V Max

Special Ed

I have never bought a repo brake hose or installed one since they are used on many cars. I replate the mounting bracket and clean the hose. I only collect good rustfree from the southwest since that steel mounting bracket does get pitted but it can be removed since it is staked on type crimp but i usually leave bracket on hose and have a guy who only replates the bracket part. The 68-70 mustang disc brake hoses are the same except the brass part where the #s and date code is changed from square to rounded top design in 1970 a running change. Torino hoses look the same but the rubber hose is shorter than mustang cougar type.

Bob Gaines

Yes restored cosmetically only. The majority will function as they should but limited use should be the realistic expectation.  The main problem with the rubber if you find a good hose core to replate and the rubber isn't too dry rotted where the thin ribs start to degrade is that the inside can collapse and restrict the flow to the point of blockage which can lock up the brake or no brake at that caliper. Yes Trailered concours (DIV II SAAC) or Thoroughbred (DIV I SAAC) are the intended usage for the informed restorer. There are some that previously made all new correct looking reproduction hose with the single crimp but I have not heard if he is still making them. I hate to be cryptic but it is kind of like talking about the guy who is a friend (on a open forum) that you buy M80's from at Fourth of July (seasonal comparison  ;)
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

Bob Gaines

If the ribs crumble when you rub them or bare patch's in the rib design the rest of the rubber integrity is the same way. At the very least expect the hose to be beyond the reasonable safe usage for street driving. 
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

shlb69

Have somee nos ones what part number are you looking for >?

Special Ed

just looked thru 20 hoses and found 2 with date codes u looking for got them in cleaner now.