WTB: C6DA pass side rear spring shackle

[21.04]

Looking for an OEM 66-67 pass side rear spring shackle with C6DA stamped on the inside of the removable plate. It's for a thoroughbred. No pits or un natural marks.

Matt

[Special Ed]

i got some i got back years ago on west coast and i only seen the c6da # on sj cars

[Fast Fords]

I have a pair of NOS 65-66 ones and they do not have anything on them. The only parts with Ford numbers are the rubbers.

[Bob Gaines]

For those reading there are a couple of different style shackles that were sold in the Ford parts department. Some sets were like assemblyline and others not. The last ones that were serviced before they went obsolete were made of a lot thicker steel when compared to the assemblyline shackles.

[21.04]

Sent Special Ed a PM.

[Special Ed]

Just got home from parts hauling trip to billups oklahoma shop so will try and find mine as i am wondering if u want just the end plate with c6da # or the studs end also?  The 71 and up were sold under a d1zz# and are factory correct being a thicker metal plate since the 71 up cars were bigger and heavier so they need beefed up as i seen thinner early year shakles bent.

[21.04]

If you had any stud ends that are pit free piece with good threads, I'd be interested in the whole shackle.

[Special Ed]

Been busy getting ready for ford carlisle and found the rest of my shackles and got them all cleaned and am seeing letters like h. a. d stamped on the inside of the shakle with the 2 studs opposite side of the c6da end plate any idea what tha means?

[21.04]

No, I have not.  Do you see h.a.d stamped on all of the shackles you have or some have them and some do not?  I have a pretty beat up piece that has the C6DA stamped plate and nothing stamped on the side with the two pins.  Perhaps some were stamped with h.a.d and others were not or there could have possibly been a manufacturing change at some point?
 

[Special Ed]

only 1 letter stamped H  and 1 A  and 1 D   not had.    call me or send phone will send photo