Master Cylinder Restoration>?

[SFcarbuff]

Looking for a great place to have my 1966 Master brake cylinder restored? 

[Rickmustang]

White Post Restoration

[FL SAAC]

Recommendation :

I would buy a brand new master cylinder for about $50

Put it on the car enjoy the car

Then send the original one out to be rebuilt

You will experience no down time

Always remember what Theophrastus said:

"Time is the most valuable thing a man can spend."   
Enjoy!

[6T6SHELBY]

White Post Restoration

They did my proportioning valve for my '66 last winter.

[SFcarbuff]

I went with White Post since I have plenty of time and the number of references I received.  Thanks

[CharlesTurner]

Not sure if this is still a thing, but some 65-66 master cylinders I had sleeved/rebuilt over the past few years have a slightly deeper cavity in the master cylinder piston where the push rod goes in.  It causes the pedal to sit a bit lower than the clutch pedal and reduces effectiveness of the brakes.  Have had at least 3 65-66 disc brake master cylinders like this.  2 of the cars I used an adjustable push rod.  Another had the push rod length modified.  It's about 1/4" difference.

Might be worth asking White Post about it.

[Bossssssss]

I have had excellent work done by Brake and Equipment Warehouse for sleeving master cylinders.
They did it with a very quick turn around time. Also, they answered all my questions and were very eager to help. I
would rate their customer service as A++.

Services: In-house cylinder sleeving for master cylinders, wheel cylinders, and calipers. They also offer custom brake hose and line fabrication and brake shoe rebuilding.
Location: 455 Harrison St NE, Minneapolis, MN 55413.
Contact: (612) 378-3141.