News:

We have implemented a Photo Gallery for hosting images right here on SAACFORUM. Check the How-To in News from HQ

Main Menu

Radial tire size?

Started by Ldouble619, May 07, 2022, 04:38:57 PM

Previous topic - Next topic

Ldouble619

What tire size and brand is everyone running for radial tires on stock 1969 Shelby rims?

Thanks

69 GT350 Vert

235/60/15 Cooper Cobras on mine.

Shelbypat

#2
I run 245/60/15 sportman, Mickey Thumpson but 235 is more popular from my observation

Patrick

Ldouble619

Thanks to both!  I those were the two tires I was debating. Mickey Thompson's ST are about the same price as the coopers (3$ more)

Ldouble619

Quote from: Shelbypat on May 07, 2022, 08:55:23 PM
I run 245/60/15 sportman, Mickey Thumpson but 235 is more popular from my observation

Patrick

Thanks, Patrick. Do you have any rubbing with the 245?  Any pics?

Bill

Quote from: Ldouble619 on May 07, 2022, 04:38:57 PM
What tire size and brand is everyone running for radial tires on stock 1969 Shelby rims?

Thanks

On my June 69 built 70 GT 350 convertible, for the street, I'm running 235/60/15 Cooper Cobras

On my old March 69 built 69 GT500 fastback (earliest big spindle car per Mongo), I ran Goodyear Assurance 215/65R15 as the 235/60/15 BFG's rubbed a little.


Spec wise, they were close enough for me
Original F60
Overall Diameter in inches-25.9
Section Width in inches-9.2

Goodyear Assurance 215/65R15
Overall Diameter in inches-26
Section Width in inches-8.5

Hope you find this helpful.

Bill
Instead of being part of the problem, be part of a successful solution.
HOW TO IDENTIFY A FORUM TROLL
https://www.saacforum.com/index.php?topic=16401.0

67 GT350

M/T tires???
Who actually makes them? Country made?
RARE  Signature Delete

Ldouble619

Quote from: 67 GT350 on May 08, 2022, 11:49:49 AM
M/T tires???
Who actually makes them? Country made?

The M/T sportsman radials are made on the same production line as the cooper radial GTs. They are nearly identical tires. The M/T supposable have a slightly sticker compound.

427hunter

I have bias ply on almost all my fleet - as long as they are new and not ancient and rock hard they drive just fine. Modern radial tires look awful and don't last at all anymore.
"You keep using that word, I do not think it means what you think it means"

Inigo Montoya

"This life's hard, man, but it's harder if you're stupid"

Jackie Brown


2000 hours of my life stolen by 602 over three years

Shelbypat

#9
Quote from: Ldouble619 on May 08, 2022, 08:51:43 AM
Thanks to both!  I those were the two tires I was debating. Mickey Thompson's ST are about the same price as the coopers (3$ more)
Quote from: Ldouble619 on May 08, 2022, 08:52:28 AM
Quote from: Shelbypat on May 07, 2022, 08:55:23 PM
I run 245/60/15 sportman, Mickey Thumpson but 235 is more popular from my observation

Patrick

Thanks, Patrick. Do you have any rubbing with the 245?  Any pics?
No rubbing.
Here a pic.
Stance is not correct as there is no heads on the engine.

Patrick

Ldouble619


shelbymann1970

Shelby owner since 1984
SAAC member since 1990
1970 GT350 4 speed(owned since 1985).
  MCA gold 2003(not anymore)
1969 Mach1 428SCJ 4 speed R-code (owned since 2013)
"2nd" owner of 68 GT500 #1626

TA Coupe

From that picture it looks like there isn't an engine in it. Looks like it is sitting pretty high to me and I don't think a set of heads and intake is going to lower it  that much?

Roy
If it starts it's streetable.
Overkill is just enough.

shelbymann1970

Since we are talking tires and whats available does anyone have a site that lists all available out there? Use the main chains or tire rack they only show you a couple like T/As and Copper Cobras and maybe one or 2 others. Those sites didn't show all like Belle tire gives me 3 options and not all available. I'm looking to put 215-65-15s on the front on my 69 Mach1(68 and early 69 tire size of E-70-15s) and either 245/255-60-15s in the rear. I did that on my 68 Shelby(255s) and like the look. Gary
Shelby owner since 1984
SAAC member since 1990
1970 GT350 4 speed(owned since 1985).
  MCA gold 2003(not anymore)
1969 Mach1 428SCJ 4 speed R-code (owned since 2013)
"2nd" owner of 68 GT500 #1626

Bill

Quote from: shelbymann1970 on May 09, 2022, 07:17:25 AM
Since we are talking tires and whats available does anyone have a site that lists all available out there? Use the main chains or tire rack they only show you a couple like T/As and Copper Cobras and maybe one or 2 others. Those sites didn't show all like Belle tire gives me 3 options and not all available. I'm looking to put 215-65-15s on the front on my 69 Mach1(68 and early 69 tire size of E-70-15s) and either 245/255-60-15s in the rear. I did that on my 68 Shelby(255s) and like the look. Gary

You'll like the eagle assurance, smooth, black, sidewall for the front, not certain about your requested rear tire size. Fills the wheel well quite nicely. Think there may be an earlier thread where I posted comparison pictures of the two.

Bill
Instead of being part of the problem, be part of a successful solution.
HOW TO IDENTIFY A FORUM TROLL
https://www.saacforum.com/index.php?topic=16401.0