KR wheels

[TLea]

yes 7=67, 8=68, 9=69 etc. also be aware wheel centers and outer rim are made separately and stamped separately so center could have center like 12 67 and outer rim K2 8
67 dates I've seen 6/67, 7/67,9/67, 11/67 and 12/67
68 dates too many to list
other markings KW, FoMoCo, 6 (width)
68 wheel dates are month/day like 3 29 etc

[Coralsnake]

I will try to post some pictures for ID

[whiteykr]

Rodney,
Another wheel to add to your 23. This is from my KR.In the center of the rim between the lug holes.K28  , fomoco, 19, and C.
Around the tire stem. K28,6, and 20.
For those that don't know the K28 means Kelsey Hayes , 2 is made in Canada, and 1968. The K38 is the same except the 3 means made in USA.
This wheel is from a July car.
Hope this helps Brad

[Peter L.]

  Haha, you guys are amazing! Didn't realize there was so much information on wheels. Now i'll be looking at every rim I find.

               Thanks again,  Pete.

[Bigfoot]

I will try to post some pictures for ID

Good luck

[KR500]

Rodney,
Another wheel to add to your 23. This is from my KR.In the center of the rim between the lug holes.K28  , fomoco, 19, and C.
Around the tire stem. K28,6, and 20.
For those that don't know the K28 means Kelsey Hayes , 2 is made in Canada, and 1968. The K38 is the same except the 3 means made in USA.
This wheel is from a July car.
Hope this helps Brad

Brad
Thanks for the info. I will add it to My list. When was your car build ( Ford ) date?
Thanks Rodney

[whiteykr]

Rodney,
The build date is July 18 . I am also sending you a PM. Brad

[KR500]

Brad
Thank You. Sent You a PM also.

[TXShelbyman]

Can anyone decode the date on this rim?

Inside the rim:
KELSEY CANADA
D 15 X 6 JJ  5  1  8

Inside rim on rear offset:
F         K2(an unreadable character)
D

By valve stem
K2-7  5    20   E1

Stamping between stud holes

J     5    TC     K2     Ford
                      7

Thanks!

[Coralsnake]

The 1968 wheel post tells how....

It looks like a May, 1967 wheel

[TXShelbyman]

Yea, didn't see that post until after I had posted on this thread. Thanks Pete.

[Coralsnake]

Does it have three slots or three nubs?

[TXShelbyman]

This is the rim.

[KDunne]

This is the rim.

That  wheel doesn't look like a Shelby wheel.  The hub doesn't have correct sized center hole and the area around lugs nuts appear to be raised.

[Coralsnake]

What are the numbers in the areas circled?




The center hole does look bigger than 2 1/2 inches I do agree.....can you measure it?

Are you reading the other thread?

http://www.saacforum.com/index.php?topic=1473.0