Topics

1) Flying Mustang GT350 Green Valley 02/14/1965. Shelby American Collection silent auction item 12/04/1999.
#145/500. Framed dimensions 29.5"h x 16.25"w x 1"d
$450
2) GT350 lithograph. Another SAC silent auction item, can't remember which year.
#206/500. Signed and numbered by Bill Neale, signed by Shelby.
Framed dimensions 28"h x 22.25"w x 1.5"d.
$450
I accept PayPal friends and family. Items shipped US only, Shipping and insurance included. Messages answered in order received.

I have a 67-68 4 speed shifter box in good condition with some patina. Good for a survivor car. Box has been disassembled, cleaned, greased and reassembled with a new wave washer and lockout spring. The original horseshoe had weak threads and has been replaced. This has the 2" spacing.

The shifter lever is an origin 68 part with good chrome, and has no slop. It also has the 2" spacing. $550 for both pieces plus shipping USPS Priority with insurance.
Willing to separate and open to offers.
PayPay friends and family.
Thank you
Joe
SFMS6 email afm17664@msn.com

Longtime SAAC member William (Bill) E. Miller passed away on November 30, 2024 at the age of 91. He was recently diagnosed with tumors in his brain. Bill purchased his renowned black and gold 1966 GT350H in April of 1981 and immediately joined SAAC and the Colorado chapter. He became heavily involved in both open track event and vintage racing. He drove his car to several SAAC conventions and participated in the Rocky Mountain Vintage Racing Association. He was a proud promoter of the marque and of all the organizations he belonged to.
 On the local level Bill served in several capacities as a CO SAAC rep, president, vice president and organizer of our four to six open track events we put on annually. His most recent outing with his GT350H was the Shelby American Collection party this past August.
  Our thoughts and prayers go out to his longtime companion Mary Sue Powell, Bill's two daughters and his many grandchildren.
  Celebration of life events are pending.

Is there an approximate date/VIN sequence of when the floor pans changed regarding the "hump" for the routing of the parking brake cables? This is regards to the cables going between the floor pan and rear frame rails versus later 66 cars whee the cable was routed under the frame rail.

Thank you. Joe

I have one pair of headlights housings complete for sale. I prefer to sell as a set but will separate if I have a buyer for each side. More pics available. Shipping extra. SOLD
Thank you. Joe

I have a pair of original sills with no cracks. The RH side is thinner plastic than the driver side and may be a service replacement judging by the screws and lack of rivets. These allegedly came from Walt Hanes shop when he closed. I will ship what you see. More pics on request. $450 plus shipping and insurance.
Thanks for looking.Joe  sfm17664@msn.com

I have a complete pair of redone 1/4 window sills from 6S1370. They were stripped and analyzed, I honestly can't remember when I had them done. They have been on my display wall and I have no future use for them. They are NOT concourse quality, but driver quality. You are getting what you see in the pics: 4 replated trim pieces,4 used stainless clips, two original plexiglass windows that have been cleaned up but are not showing quality.$250 plus shipping.
Thanks, Joe. sfm17664@msn.com

I have four repro ten spokes with center caps for sale. One wheel had some curb rash that has been polished out. $1000 or offers, buyer pays shipping.

Pm or email: sfm17664@msn.com

Thank you, Joe

One pair front Koni shocks. These are new (zero miles) in the older packaging two per box.
Pics on request.  $225 includes shipping in the continental US. PayPal friends and family preferred.
Thank you, Joe

I have a set of 8 Dust seal retainers for the early  style disc brake calipers. Still in the Ford wrappers.
part number C5ZZ-2A492-A. These are the rings pressed onto the caliper to hold the dust seal on.
Pics on request, $75 including shipping USPS in the US.
Joe

I have a really nice pedal bracket from a non power brake automatic Mustang. Has been dipped and is rust free and is coated with Boeshield. Numbers stamped in the bracket are  C7ZB 65N 3 6 D2
Pics on request
Asking $100 plus the ride.
Joe

I have a Ford remanufactured water pump. It has a cast four hole impeller. Have new backing plate bolts and both gaskets.
Pics on request. $175 plus shipping.
Joe

 I have a friend looking for the correct brake pedal for his four speed car. Not interested in a reproduction item, he's picky...like most of us. let me know what you have and a couple pics and I will forward to him with your contact info.
Thank you, Joe
sfm17664@msn.com

Is there a schedule of events for the Concourse/ Car show part of the event. I have a friend who is lives nearby that wants to look at cars. I looked at the registration link and its closed. Also what will be the daily fee.
Thank you, Joe.

I have a pair of repair kits for the K/H four piston calipers. I can ship USPS priority mail, postage included. The seals and dust boots will be removed from the box and placed in baggies. You will get the boxes they came in, flattened for shipping. $100.
Thank you. Joe

I have a pair of original cast brackets for mounting the TM under-ride bars at the axle. I also have an extra RH bracket. I have pics on request. These are not perfect and show some compression where the bar is mounted. I have pics on request. I'm asking $25 each plus shipping USPS Priority Mail. Email or text number for pics. SOLD

Thank you.

Joe

Up for sale is a 4194S Carter button top fuel pump. Rebuilt by Fred Ballard and is compatible with current fuels. This is for 390 Mustangs and Fairlanes.  Date code 12E9A.  Email or send your text number for picks. Replies answered in order received.
$350 or offer plus shipping.  SOLD
Joe

I have a pair of the bottom leaf springs with part number C4ZA 5556 S Date code 237 E5.

This is only for the bottom pair of leafs with the part number. Pics available on request.

Inquiries will be answered in the order received. $250 or offer plus shipping.

Joe sfm17664@msn.com

Date code 8B21. Rebuilt and unused, casting is bare metal and ready for your choice of paint.
SOLD
Messages will be answered in the order received.  Photos available on request.
PayPal friends and family accepted.
Joe sfm17664@msn.com

I am looking for the 28 spline output shaft for a Mustang/GT350.
I have come across some earlier ones with 25 spline but would rather have the correct part.
Thank you.

Joe