Messages

Looking for a really nice, or NOS, fan shroud for a 68.  Would be marked with the engineering number C8ZE-8146-B on the top as shown.  Call, email or text if you can help with one.

Marcus
602 628 2522
marcus@anghelrestorations.com

20220508_120626 by Marcus Anghel, on Flickr

20220508_120633 by Marcus Anghel, on Flickr

C9ZA AM/FM radio ....this unit actually does work and tested it this week.  Outputs for both speakers work and dial scrolls thru the radio channels.  The wires look a bit ugly because someone cut them at one point, but it has the correct colors and connectors in place.  Front faceplate has a small crack in the middle which is typical with these radios.  See photos.

$750 plus shipping

Call email or text
marcus@anghelrestorations.com

20220422_133354 by Marcus Anghel, on Flickr

20220422_133336 by Marcus Anghel, on Flickr

20220422_133303 by Marcus Anghel, on Flickr

NOS in perfect condition FA-41 Autolite air cleaner assembly.  See photos.
$700 plus shipping.

Call email message or text

Marcus
602 628 2522
marcus@anghelrestorations.com

20220313_092636 by Marcus Anghel, on Flickr

20220313_092603 by Marcus Anghel, on Flickr

20220313_092552 by Marcus Anghel, on Flickr

Looking for a specific 1967 GT500 that was bought at Jerry Watson Ford in Fort Wayne Indiana in 1969 and then sold in Oahu Hawaii in 1971.  Im thinking not that many could have been in Hawaii and unknown if it stayed there or was shipped back to mainland. 
VIN 67400F2A00214

If anyone knows where this car is located Im looking to purchase it.  Please contact me
marcus@anghelrestorations.com

Resized_20200716_143919_1437840569022077 by Marcus Anghel, on Flickr

I have an original black dash pad that is an assembly line piece.  This one was made by Davidson Rubber Company.
The piece is flawless and ready to install in a car.  Needs absolutely nothing - no scratches no splits or any issues at all.  This is for a car with AC. 
Asking $2200....negotiable.

Call, PM or email if interested.

Marcus
marcus@anghelrestorations.com

20220127_090946 by Marcus Anghel, on Flickr

20220127_091017 by Marcus Anghel, on Flickr

20220127_091031 by Marcus Anghel, on Flickr

20220127_091053 by Marcus Anghel, on Flickr

Added a few more items to the list here.....

Added a few more items and updated the list.....

Looking for an original assembly line C7ZE 8146 A (part number C7ZZ-8146-A) fan shroud for a 67 390/428 application.  I know they are hard to find and expensive but hoping someone has an extra one they are willing to sell out there. 

Marcus
marcus@anghelrestorations.com

Adding a list of a few things that may be of interest.  Prices are negotiable.  PM, email or call me if interested.
Marcus
marcus@anghelrestorations.com

Big block C6 tapered driveshaft used mostly in 4:30 cars  $1500
Original 1970 Boss 429 seat covers (white) from Lawman (less than 860 miles)  $2200
1967 GTA project car.  S (390) code with a 4 speed.  Rolling shell with engine and transmission and all sheetmetal.  $12,000
NOS Autolite FA-41 air cleaner in the box  $700
Autolite Parts and Service clock  $700
C8ZE 8146 C assembly line horse hair fan shroud, has some staining but not cracked  $1000
Complete set of 65/66 upper and lower control arms and tie rods restored and ready to install  $3300
NOS 67 red oxide quarter panels left and right dated 1975 and 1980.  Coupe  $1500
70 Deluxe door panels – originals, drivers door panel has a split by the door pull  $750
1967/68 NOS wheel house openings $500
Original C9ZX Boss 429 front and rear shocks dated April 1969, some pitting on the rear  $2000
Original 69 Cobrajet front and rear shocks dated December 68 and Feb 69 Excellent condition ready to install  $2000
C8ZF 18080 F3 rear shocks - one used and one NOS $900
Front shocks C9ZF 18045 C1 dated April 1969 $900
C9ZA 1969/1970 original AM/FM radio $600
NOS red oxide drivers side 69 quarter panel – correct for Cobra Jet or Shelby  $4500
66 complete 9 inch rear end assembly.  Drum to drum detailed and ready to install with 3.89 gears.  Includes center section with correct snubber bracket, correct drums and backing plates etc etc.  $3200
RUG-AG 4 speed toploader $1900

Added Jan 24:
Matched set of rear drums, pristine, detailed and ready to install.  Machined outside edge and inside.  Dated Sept and Oct 1968 $800
Assembly line black dash pad - perfect with no cuts or cracks or damage.  For an AC car $2200

Updated the parts list with prices now. 

[Open House January 29th 2022 Scottsdale Arizona]

Open House January 29th 2022 Scottsdale Arizona

Having our annual Open House during the auctions on Saturday morning January 29th from 8:00am to noon.  All Mustang, Boss and Shelby enthusiasts welcome.  Will be the usual "Cars and Coffee" theme with breakfast/lunch being served from one of our local food trucks.  Should have some good displays...still finalizing the theme.  Will also be digging into my stash of parts and selling some rare and hard to find pieces as I am running out of storage.  Partial list here for those interested below...plus some free parts I will have looking for a good home:

Like everything in life prices are negotiable....

Big block C6 tapered driveshaft used mostly in 4:30 cars  $1500
Original 1970 Boss 429 seat covers (white) from Lawman (less than 860 miles)  $2200
1967 GTA project car.  S (390) code with a 4 speed.  Rolling shell with engine and transmission and all sheetmetal.  $12,000
NOS Autolite FA-41 air cleaner in the box  $700
Autolite Parts and Service clock  $700
C8ZE 8146 C assembly line horse hair fan shroud, has some staining but not cracked  $1000
Complete set of 65/66 upper and lower control arms and tie rods restored and ready to install  $3300
NOS 67 red oxide quarter panels left and right dated 1975 and 1980.  Coupe  $1500
70 Deluxe door panels – originals, drivers door panel has a split by the door pull  $750
1967/68 NOS wheel house openings $500
Original C9ZX Boss 429 front and rear shocks dated April 1969, some pitting on the rear  $2000
Original 69 Cobrajet front and rear shocks dated December 68 and Feb 69 Excellent condition ready to install  $2000
C8ZF 18080 F3 rear shocks - one used and one NOS $900
Front shocks C9ZF 18045 C1 dated April 1969 $900
C9ZA 1969/1970 original AM/FM radio $600
NOS red oxide drivers side 69 quarter panel – correct for Cobra Jet or Shelby  $4500
66 complete 9 inch rear end assembly.  Drum to drum detailed and ready to install with 3.89 gears.  Includes center section with correct snubber bracket, correct drums and backing plates etc etc.  $3200
RUG-AG 4 speed toploader $1900

Added Jan 24:
Matched set of rear drums, pristine, detailed and ready to install.  Machined outside edge and inside.  Dated Sept and Oct 1968 $800
Assembly line black dash pad - perfect with no cuts or cracks or damage.  For an AC car $2200


20220115_103415 by Marcus Anghel, on Flickr

2022-01-16_13-18-15 by Marcus Anghel, on Flickr

2022-01-16_13-20-14 by Marcus Anghel, on Flickr

2022-01-16_13-21-30 by Marcus Anghel, on Flickr

Looking for a 1968 GT500 KR original Highland Green fastback..... ideally with a parchment interior.  Can be a restored car, or a car that needs to be restored.  I can be available to look at a good candidate regardless of location. 
Call, email or message if you know of anything or have anything willing to part with. 

marcus@anghelrestorations.com


2021-12-27_23-46-54 by Marcus Anghel, on Flickr

[https://rmsothebys.com/en/auctions/mo21/monterey/lots/r0123-1966-shelby-gt350-h/1129322]

Next week I am flying out to Philadelphia to look at this car...trying to get details if anyone knows who did the restoration or seen this car before.  I contacted Steve Beck who is credited for doing the restoration but he says its a mistake the auction house made and he never touched it.  This car sold for $280,000 back in August of this year and its a 4 speed car so not too many of them around....hoping someone has information.  If so, let me know and send me a PM or email.  Trying to get some background on this one. 

Marcus
marcus@anghelrestorations.com

https://rmsothebys.com/en/auctions/mo21/monterey/lots/r0123-1966-shelby-gt350-h/1129322

Looking for a clean original 1968 coupe (or convertible) decklid.  Something without rust and no major damage.
Send me a message, call, email, PM or text if you have something. 

Thanks,
Marcus
602 628 2522
marcus@anghelrestorations.com

[http://anghelrestorations.com/uploads/3/5/1/2/35122002/toploader_67_to_73_1.4_opt.pdf]

Updated version now adds reference to the C6OR-7A040-D on page 4.

http://anghelrestorations.com/uploads/3/5/1/2/35122002/toploader_67_to_73_1.4_opt.pdf