Topics

[https://anghelrestorations.com/wp-content/uploads/2026/01/Jack-handles-v1.1-comp.pdf]

Posting up here the latest article that just got finished...heve plenty more to come in the next few weeks and months.  This should be helpful for those of us wondering what is correct for the different years we are working on.   Click on the link below to open up the article and let me know if you have questions.  Thanks to those who took time out and helped that I mention in the article.

https://anghelrestorations.com/wp-content/uploads/2026/01/Jack-handles-v1.1-comp.pdf


20251230_124241 by Marcus Anghel, on Flickr

[Saturday morning January 24th from 8:00am to 11:00amAnghel Restorations 6103 E Desert Cove Ave Scottsdale602 628 2522]

Saturday morning January 24th from 8:00am to 11:00am
Anghel Restorations
6103 E Desert Cove Ave Scottsdale
602 628 2522
For everyone coming out to Scottsdale in January we will be hosting our annual Open House and Cars and Coffee event.  Proud to be officially a part of Arizona Car Week:
https://arizonacarweek.org/event/anghel-car-week-open-house/

All car enthusiasts are welcome plus friends, family, and kids - no pre registration is necessary.  If you have questions just reach out.  Looking forward to seeing everyone who can make it. 
https://anghelrestorations.com/annual-open-house/

Details below and some highlights:

• This year will be a big emphasis on Boss 429s and Boss 302 Mustangs
• Will also have a good mix of first generation Mustangs, Cougars, Shelbys on display.
• There will be cars in various stages of restoration with some on display on the lifts.
• We will have a parts for sale section here with alot of original parts - including some freebees left over from previous restorations.
• Food truck will have full breakfast and coffee available.

2025-11-10_22-11-11 by Marcus Anghel, on Flickr

2025-11-10_22-13-12 by Marcus Anghel, on Flickr

Looking for a fill plug for a factory 9 inch rear end for a 1967....but should be the same for a 1966 as well.  Im not aware anyone makes a reproduction of this?
The fill plug I have doesnt seem right with the beveled edges so dont think this will seal correctly.  If anyone has an extra let me know.

Ford part number - Axle Filler Plug 379166-S

Marcus
602 628 2522
marcus@anghelrestorations.com



20251111_162058 by Marcus Anghel, on Flickr


20251111_162107 by Marcus Anghel, on Flickr

1969 1970 Shelby front seats.  I have these listed on Ebay right now but also posting here.  Pretty much impossible to find a set of original seats like in this condition anymore.  Can be installed as is....the one seat back has two screws in it so probably would change that out.  But this is original comfortweave material and soft and plyable still.  Contact me with any questions or need more photos or information. 

Shipping can be done thru a crating and freight service here in Phoenix if needed.

Asking $2200.

Ebay auction with more photos and description:
https://www.ebay.com/itm/157171083032
 

Marcus
Phone or email is best way to reach me
602 628 2522
marcus@anghelrestorations.com


20250714_203702-001 by Marcus Anghel, on Flickr

I have a project in the shop Im working on now for a 1969 GT500.  Looking for original air conditioning lines that are under the hood......this is for a 428 car.  Email or call me if you have something you can help with.

marcus@anghelrestorations.com
602 628 2522

Looking for a nice used set of license plate light caps that are on the rear panel.  Missing a set if anyone out there has an extra set let me know.  Not sure why they are missing....but thats how alot of these projects go.      Call or email me if you can help. 

Marcus
602 628 2522
marcus@anghelrestorations.com
 


2025-05-13_8-30-52 by Marcus Anghel, on Flickr

2025-05-13_8-31-37 by Marcus Anghel, on Flickr

Im chasing an electrical issue here tonight on a 69 GT500 I am finishing.  Everything runs and drives and works perfect....except the fog lights. 

Inside the car the interior light switch works with no problem in the console.  But when turning on the fog light switch it just clicks the relay on and off every 5 seconds and the fog lights never turn on.  I  have a complete extra gauge and switch console that I swapped out and does the exact same thing.

So I think something isnt wired here correctly.  Can someone confirm the routing of the three wires here at the voltage regulator, starter solenoid, junction block? 
First picture below is just a reference photo I pulled from Bring a Trailer (Nate Jones) Shelby that recently sold.

2025-02-20_21-11-19 by Marcus Anghel, on Flickr

20250220_222819 by Marcus Anghel, on Flickr



   

Looking for actually just the front headliner bow for a 70 Boss 302.  Should be marked with white paint on the ends, but will buy a full set if anyone has anything for sale.
Coupe and fastback headliner bows are different. 

Call, email or text
Marcus
602 628 2522
http://marcus@anghelrestorations.com

 

[Saturday morning January 25th from 8:00am to 11:00amAnghel Restorations and Dyno Don6103 E Desert Cove Ave Scottsdale602 628 2522]

Saturday morning January 25th from 8:00am to 11:00am
Anghel Restorations and Dyno Don
6103 E Desert Cove Ave Scottsdale
602 628 2522
For everyone coming out to Scottsdale in January we will be hosting our annual Open House and Cars and Coffee event.  All car enthusiasts are welcome plus friends, family, and kids - no pre registration is necessary.  If you have questions just reach out.  Looking forward to seeing everyone who can make it. 
https://anghelrestorations.com/annual-open-house/

Details below and some highlights:

• Featuring Dyno Don's record breaking Mustang that was just recently unveiled at SEMA and not been in public for 45 years.
• Will have a good mix of first generation Mustangs, Cougars, Shelbys, and Boss cars on display.
• The actual movie car from Tommy Boy will be on display as its going thru a full restoration here.  Full details on the website. 
• There will be cars in various stages of restoration with some on display on the lifts.
• We will have a parts for sale section here with alot of original parts - including some freebees left over from previous restorations.
• Food truck this year will be from a local coffee shop serving all kinds of specialty coffees and snacks.

For those not on the mailing list we sent these out in the last month with address and full details (if you want to be added to the mailing list let me know):

Open House 1 by Marcus Anghel, on Flickr

Open House 2 by Marcus Anghel, on Flickr

Looking for an original smog pump pulley for a 428 with AC.  These pulleys are different than the regular smog pumps since they share the AC belt and need a wider groove for that.  Engineering number is a C90E-9C480-A and used on 1969 and 1970 Cobra Jets.  If you have one to sell let me know.  Email, text or phone is the best to reach me.

Marcus
602 628 2522
marcus@anghelrestorations.com 

Have an extra carb here - excellent condition and really clean original that has just been sitting on the shelf for years.  All the parts are there and the correct metering blocks as well.
Call email or text me if interested as I am not checking messages on the forum enough.
Marcus 602 628 2522
marcus@anghelrestorations.com


C9AF-9510-N
1969 Mustang, Cougar and Shelby GT500 with a 428 engine and automatic transmission. 
Also used on 1970 Shelby GT500 with 428 and automatic transmission.
Dated 974 = 1969, 7th month, 4th week
Correct metering blocks 5671 and 5673
$1500

20240805_185840 by Marcus Anghel, on Flickr

20240805_185827 by Marcus Anghel, on Flickr

20240805_185859 by Marcus Anghel, on Flickr

20240805_185927 by Marcus Anghel, on Flickr

Looking for an original style Carter X fuel pump that would be used on a big block application - in this case 1969 428 engine.  Originals have a casting number of 4441S.  Date code is not as important as just getting one of these to replace the aftermarket I have here. 

Call email or text if you can help as I dont check messages on here enough.

Marcus
602 628 2522
marcus@anghelrestorations.com

Selling a set of 65/66 Shelby Tri-Y headers and H pipe.  These were both new made by Scott Fuller - see photos where they were installed on a 1968 Mustang.  They will fit on any 1965 to 1968 Mustang and possibly later years as well. 
Have about 30 miles on them total. 
 
I had to put a small dimple in the drivers side header to clear the power steering ram.  The H pipe was modified for an O2 sensor.  Also includes the drop bracket for the power steering. 

Call text or email me if interested directly as I do not get on the forum often enough. 

Originally paid $3600.  Asking $2000.

Marcus
602 628 2522
marcus@anghelrestorations.com

20240621_152143 by Marcus Anghel, on Flickr

20240618_205048 by Marcus Anghel, on Flickr

20240618_205153 by Marcus Anghel, on Flickr

20240618_205048 by Marcus Anghel, on Flickr

 

[Saturday morning January 27th from 8:00am to 11:00amAnghel Restorations6103 E Desert Cove Ave Scottsdale602 628 2522]

Saturday morning January 27th from 8:00am to 11:00am
Anghel Restorations
6103 E Desert Cove Ave Scottsdale
602 628 2522
For those who are coming out to Scottsdale in January we will be hosting our annual Open House and Cars and Coffee event.  All car enthusiasts are welcome plus friends, family, and kids - no pre registration is necessary.  If you have questions just reach out.  Looking forward to seeing everyone who can make it. 
https://anghelrestorations.com/annual-open-house/

Details below and some highlights:

• Will have a good mix of Mustangs, Cougars, Shelbys, and Boss cars on display plus some newer super cars.
• The actual movie car from Tommy Boy will be on display as its going thru a full restoration here.  Full details on the website. 
• There will be cars in various stages of restoration with some on display on the lifts.
• We will have a parts for sale section here with alot of original parts - including some freebees left over from previous restorations.
• Food truck this year will be from a local coffee shop serving all kinds of specialty coffees and snacks.

For those not on the mailing list we sent these out in the last month with address and full details (if you want to be added to the mailing list let me know):

20231229_131711 by Marcus Anghel, on Flickr

[Saturday morning January 27th from 8:00am to 11:00amAnghel Restorations6103 E Desert Cove Ave Scottsdale602 628 2522]

Saturday morning January 27th from 8:00am to 11:00am
Anghel Restorations
6103 E Desert Cove Ave Scottsdale
602 628 2522
For those who are coming out to Scottsdale in January we will be hosting our annual Open House and Cars and Coffee event.  All car enthusiasts are welcome plus friends, family, and kids - no pre registration is necessary.  If you have questions just reach out.  Looking forward to seeing everyone who can make it. 
https://anghelrestorations.com/annual-open-house/

Details below and some highlights:

• Will have a good mix of Mustangs, Cougars, Shelbys, and Boss cars on display plus some newer super cars.
• The actual movie car from Tommy Boy will be on display as its going thru a full restoration here.  Full details on the website. 
• There will be cars in various stages of restoration with some on display on the lifts.
• We will have a parts for sale section here with alot of original parts - including some freebees left over from previous restorations.
• Food truck this year will be from a local coffee shop serving all kinds of specialty coffees and snacks.

For those not on the mailing list we sent these out in the last month with address and full details (if you want to be added to the mailing list let me know):

20231229_131711 by Marcus Anghel, on Flickr

Im working on a 69 Shelby here now that was stored for many many years.  Wondering if anyone has used any decent products to clean the center of the wheels.  I tried something called Sonax and that did not do anything.  Thinking I need something that is acidic to clean in to the pores. 
Below is side by side photos of what I started with.  I dipped each wheel in Evaporust which made a huge difference but some of the wheel centers are not as bright and clean as others.

20231130_110126 by Marcus Anghel, on Flickr

20231129_160828 by Marcus Anghel, on Flickr

Looking for a nice clean rust free rear decklid for a 1968 fastback.  What I have now is one that is rusted along the seam so looking for a nice replacement.  Text or call if you have something to sell.

Marcus
602 628 2522
marcus@anghelrestorations.com

Listed locally here in Phoenix but figure I would list on the forums as well.  Can easily arrange shipping if needed. 

Ford C6 transmission out of a 1967 Mustang. Would work for other years of Mustangs (1967 to 1973), Cougars, Fairlanes and probably some truck applications. No stripped holes for starter or broken mounting tabs. Includes torque converter as well.
Selling this as a restorable core.
The valve body needs to be redone - it has an issue with a sticking valve. Can be rebuilt or replaced. Including two extra valve bodies for the rebuild in case they are needed.

$600
Marcus
602 628 2522
marcus@anghelrestorations

20230305_204231 by Marcus Anghel, on Flickr

I have heard rumors but have not seen any pictures or center console lids that look any different than what I have here.  Curious if anyone has seen the console stamping slightly different on an original.  This is what I consider correct originals:

20230727_171235 by Marcus Anghel, on Flickr

20230727_170916 by Marcus Anghel, on Flickr

I have an unopened AMK box if someone needs this.  This is the 1965 AMK concours chassis kit for 289 HiPo with disc brakes.  Current online price is $473.80. 
$350 plus $20 shipping to your door. 

Link here:
https://www.npdlink.com/product/chassis-kit-concours/100694?backurl=search%2Fproducts%3Fsearch_terms%3D1000-3bk%26top_parent%3D200001%26year%3D

Marcus
marcus@anghelrestorations.com
602 628 2522