News:

SAAC Member Badges are NOW available. Make your request through https://saac.wildapricot.org  to validate membership.

Main Menu

original solid letter Cobra valve covers for sale

Started by 1175, March 30, 2019, 04:00:44 PM

Previous topic - Next topic

1175

Up for sale an original set of solid letter Cobra valve covers for sale.  These are the original type with the extra nubs 'fangs' above PCV and oil filler hole.  One baffle missing and needing a refresh.

SOLD to DR

thanks
Jon


69mach351w

I know this is an old post, but how can you tell if solid cobra valve covers are original Shelby covers.
Does the aftermarkets have the so called "fangs"?
And does the Shelby originals all have fangs?
I'm wanting some for my 289 built motor and I would rather have originals

Bob Gaines

Quote from: 69mach351w on November 20, 2026, 02:24:00 PMI know this is an old post, but how can you tell if solid cobra valve covers are original Shelby covers.
Does the aftermarkets have the so called "fangs"?
And does the Shelby originals all have fangs?
I'm wanting some for my 289 built motor and I would rather have originals
Some but not all of the aftermarket valve covers have the fangs. They are slightly different than the fangs on the assemblyline valve covers.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

69mach351w

I'm looking at some that I think are real, and maybe assembly line covers. Any help is appreciated.

98SVT - was 06GT

There are 1,000s of "real" ones. They were made (by Ansen?) from 1966-1970 and sold OTC at Ford parts counters as well as being installed on the assembly line.
Previous owner 6S843 - GT350H & 68 GT500 Convert #135.
Mine: GT1 Mustang, 1998 SVT 32V, 1929 Model A Coupe, Wife's: 2004 Tbird
Member since 1975 - priceless

s2ms

Quote from: 69mach351w on November 21, 2026, 08:56:57 PMI'm looking at some that I think are real, and maybe assembly line covers. Any help is appreciated.

Besides the "fangs" differences between some current repops and assembyline that Bob mentions, the other details to look for are the baffle style, and thickness/spacing of the horizontal ribs. Here's a couple on ebay with good photos you can compare to the ones you are looking at:

OE originals (listed as NOS but clearly are not): https://www.ebay.com/itm/306773800635

Scott Drake Repops: https://www.ebay.com/itm/128113226784
Dave - 6S1757

69mach351w

The first ones on epay you listed are OE originals?
Wonder why the seller would list them  as NOS?