News:

SAAC Member Badges are NOW available. Make your request through saac.memberlodge.com to validate membership.

Main Menu

Looking for a early 66 intake manifold

Started by Karguy, March 07, 2019, 01:05:51 AM

Previous topic - Next topic

Karguy

Looking for a early 66 S2MS intake manifold: WTB  early 66 intake with firing order and part number on the rear and the square corner Cobra casting. Any help would be greatly appreciated.
Thanks, Karl
6S281, in my family from 1972-1983. Back home January 2017, will not leave again!

Karguy

6S281, in my family from 1972-1983. Back home January 2017, will not leave again!

Karguy

6S281, in my family from 1972-1983. Back home January 2017, will not leave again!

6s1640

Hi Karl,

No luck at the Portland Swamp Meet for a early COBRA intake, but I did spot two later versions.

I am looking for you.  There is the Monroe (Greater Seattle Swap Meet) coming up in May in my next chance to look.  This swap meet has been fruitful in the past.  Two years ago I picked up an original COBRA oil pan with a little damage for $75.   :D

Cory

68cobra427

The top picture is mine. The bottom picture is Tony from California. I have his # if someone wants a real polished cobra intake. Mine is over the counter.


Troy

6s1640

Hi Karl,

Back from the Monroe Swap Meet I mentioned earlier.  Sorry, no luck.  I did find one COBRA intake, a S7MS, a S2MS COUGAR intake and a TIGER intake (Not - the OEM TIGER intake was a two barrel.)

Below are the images.  How's the search on your end?

Cory

GT350Lad

Will find one for you Karl, the club power will prevail
6S373
6S1276

Karguy

Thanks Cory and Trent, please keep looking. Thanks
6S281, in my family from 1972-1983. Back home January 2017, will not leave again!

Karguy

6S281, in my family from 1972-1983. Back home January 2017, will not leave again!

Karguy

6S281, in my family from 1972-1983. Back home January 2017, will not leave again!

Karguy

6S281, in my family from 1972-1983. Back home January 2017, will not leave again!

sfm6s1506

I have one that was taken off of 6s102. I'll send pics to you by email. Just inbox me your email👍

TJinSA

Should KARGUY express no interest in your intake from 6S102; please contact me for 6S296
Tom Kubler
6S296

Bob Gaines

A intake from 6S102 would most typically be a small letter Cobra intake and not the large letter Cobra intake with the squared corner like you have been asking about.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

Karguy

6S281, in my family from 1972-1983. Back home January 2017, will not leave again!