Beltline kit manufacturer recommendations

[rdmgt500]

I need to replace the beltline moldings on my 69 GT500. I read many good reviews about Daniel Carpenters weatherstripping kits, however, they don't seem to make the door beltline inner/outer weatherstrip. Repops and PUI beltline kits gets mixed reviews. Would appreciate any recommendations. Thank you.

Bob

[aj]

PM sent.

[CompRed70scj]

I just installed the Repops versions, and am not impressed. Their kit is for a 1970, so it mounts differently. It will flop around unless I drill a hole in my doors to screw in the ends.

[SCJSTU]

Matt in WV has a NOS set on Facebook Matt N Jen
for sale.
21m
listed an item
. ••
C9ZZ-6371903 E
$400
1969 Ford Mustang NOS
Door Belt Moldings
Beckley, WV
Message

[shelbymann1970]

Beltlines are DIFFERENT on a FB compared to a convertible.

[shelbymann1970]

I just installed the Repops versions, and am not impressed. Their kit is for a 1970, so it mounts differently. It will flop around unless I drill a hole in my doors to screw in the ends.

I bought the 68s and 69s sets off of Brant last year. Here was his post here. He may still have the pass side available. https://www.saac.com/forum/index.php?topic=30657.msg219096#msg219096

[98SVT - was 06GT]

It will flop around unless I drill a hole in my doors to screw in the ends.

Use 3M trim tape on the ends - gave you the Walmart link. You can get it at all the auto stores too but they charge twice as much.
https://www.walmart.com/ip/3M-Super-Strength-Molding-Tape-1-2-x-5/16913678?wmlspartner=wlpa&selectedSellerId=0&wl13=2292&gclsrc=aw.ds&adid=2222222227716913678_117755028669_12420145346&wl0=&wl1=g&wl2=c&wl3=501107745824&wl4=pla-394283752452&wl5=9031214&wl6=&wl7=&wl8=&wl9=pla&wl10=8175035&wl11=local&wl12=16913678&veh=sem_LIA&gclsrc=aw.ds&gad_source=1&gad_campaignid=12420145346&gbraid=0AAAAADmfBIoKt8FpqQ4t_nfAFjSIOMK6C&gclid=CjwKCAiA3-3KBhBiEiwA2x7FdM0HAKCW3q4gEQA5kE6lSmqwG9cirv8ganIDxn83bepBSnz4DbllRRoCtX0QAvD_BwE

[CompRed70scj]

Beltlines are DIFFERENT on a FB compared to a convertible.

Do you know the difference?