Vintage Schrader Yellow High Pressure Valve Stem Caps

[RedBarchetta]

Vintage Schrader Yellow High Pressure Valve Stem Caps (EDITED FOR CURRENT INVENTORY on 12/22/25)

New REDUCED pricing on non-restored originals.  Please read details below.

These are the identical, hard-to-find high pressure valve caps that were on Goodyear innertubes as supplied by Carroll Shelby when he sold racing tires. They have "Schrader U.S.A. MS 20813-1" engraved on the side, the prominent crown at the top (new examples sold by Dill do not have this detail), as well machined twin indentations on each of the upper hexagon edges (another detail that new examples do not have).



They were recently sourced from a Los Angeles warehouse where they have been resting for 50+ years.  Three different sets are available:

1.  As is with all of the patina:



2.  Refinished in matching Yellow Zinc Chromate:



3.  Refinished in a brighter yellow (more consistent with 289 cars and some of the early 3000 series):
*** SOLD OUT ***



The untouched originals now sell as a set of four (4) for $30 + $7.50 shipping.  These have moderate amounts of patina and paint chipping, as several sets of the finer examples originally offered have all been sold.  These still look the part on any car that wants the correct "on race day" look.. I will send photographs to anyone that requests to see the exact set they will be receiving, accordingly.

Refinished options sell as a set of FIVE (4) for $50 + $7.50 shipping. Refinished options are very limited quantities and once they are gone that's it.

I accept Venmo, Zelle and PayPal (friends and family option only).  Please PM me for specific payment details, accordingly.

[Bob Gaines]

Vintage Schrader Yellow High Pressure Valve Stem Caps

These are the identical, hard-to-find high pressure valve caps that were on Goodyear innertubes as supplied by Carroll Shelby when he sold racing tires. They have "Schrader U.S.A. MS 20813-1" engraved on the side, the prominent crown at the top (new examples sold by Dill do not have this detail), as well machined twin indentations on each of the upper hexagon edges (another detail that new examples do not have).



They were recently sourced from a Los Angeles warehouse where they have been resting for 50+ years.  Three different sets are available:

1.  As is with all of the patina:



2.  Refinished in matching Yellow Zinc Chromate:



3.  Refinished in a brighter yellow (more consistent with 289 cars and some of the early 3000 series):



The untouched originals sell as a set of four (4) for $40 + $7.50 shipping. Both refinished options sell as a set of four (4) for $50 + $7.50 shipping. Of the large lot that I have in my possession, I will cherry pick the absolute best ones for you (and, upon request, send photos to you to confirm in advance). Refinished options are very limited quantities and once they are gone that's it.

I accept Venmo, Zelle and PayPal (friends and family option only).  Please PM me for specific payment details, accordingly.

So race application only? Did theses come on regular production MK1 ,II or III cars?

[RedBarchetta]

Hello Bob.  When an original owner bought GY racing tires directly from Carroll Shelby, these caps were on the innertubes that he also sold with them.  So they were used for Cobras being raced with that tire/tube set-up.  But a lot of Shelby enthusiasts are putting these on non-racing Cobras and Cobra replicas.  They are just another cool detail item from back in the day. 

I communicated with renowned Cobra expert Dan Case regarding these.  The brighter yellow ones are a match to photos he shared with me with respect to the 289 cars. 

As for current usage, given their age and the hardened rubber seals that are still internal to these, I would not recommend them for racing usage.  They are strictly ornamental and will still serve as a debris/dust cap to any modern valve stem.

Kind regards,

-Dean

[CSX4781]

Dean,
  Sent you a PM.

Dave

[RedBarchetta]

Dean,
  Sent you a PM.

Dave

PM responded to.   Thank you for your order, Dave!

[RedBarchetta]

Please note the price reduction on the as-is unrestored patina versions.  I have sold several sets of these to enthusiasts around the world, so the remaining TEN (1) sets have more patina than the initial offerings.  Once these are gone (both the non-restored and refinished examples) there won't be any more from me.  I also will share my paint code source for those that choose to refinish them in their correct yellow zinc chromate sheen.

[Dwathencars]

These yellow caps are a nice looking detail.  Although last time CSX2367 was judged at a SAAC National, the judges suggested I swap for black valve caps.   I've been at this long enough that I have learned to carry swappable spares of the various "questionable" items for my cars.  Last time CSX2367 was judged at SAAC I had both my painted wheels with whitewalls mounted to the inside and the chrome wheels that the first owner, Joe A, had bought when the Cobra was two weeks old along with the receipt from Gotham Ford for those wheels.
We are talking the Cobra to Amelia in 2026, I suppose I'll have to decide which wheels and valve caps....    This is a fun hobby!    Dave

[RedBarchetta]

*** UPDATE ***

Pictured are the absolute LAST sets that I still have available (this after starting with over 300 caps):

Only ONE set (of 4 caps) remaining of the unrestored as-is caps w/patina.

Only THREE sets (of 5 caps) of the restored/refinished caps in original Yellow Zinc Chromate color.

The unrestored are still $30 + $7.50 shipping. The restored are now being offered in a set of 5 because I ended up with a few extras. Some previous buyers requested five (5) caps (perhaps to have a spare?). The restored caps are still $40 + $7.50 shipping but now buyers will get one extra. If you have a newer car or one with fresh/very nice paint and wheels, I would strongly recommend the restored versions. They will definitely blend in better and be more subtle on a fresh car.

Once these are gone they are GONE. There will not be another batch or efforts from me. A big THANK YOU to all of you that have already purchased one or more sets, and HAPPY HOLIDAYS TO ALL!

[Vernon Estes]

these are awesome! Very happy with the three sets of unrestored beauties that I purchased !

[RedBarchetta]

Thank you, Vern.  Appreciate the validation and makes me delighted that you are very happy with these.

[CSX4781]

Just sent you a PM.

Thanks,
Dave

[Curt Gowdy]

Just sent a PM.

Thanks
Tom

[RedBarchetta]

Dave and Tom,
PM's acknowledged and thank you for your respective orders.
This reduces the available inventory to just ONE restored set of 5.
-Dean