Chrome plating plastic

[1109RWHP]

Who re chromes plastic these days? The last place I used was Mr. G's Mustang City so that shows you how long it's been since I had any done.

[Rickmustang]

Instrument Specialties did mine. Took a long time to, so ask.

[kasearch@ix.netcom.com]

I've been using GCAR for over 30 years to do mine. Great prices, exceptional quality.

[FL SAAC]

Just Dashes
5941 Lemona Avenue
Van Nuys, CA 91411
818-780-9005

[69 GT350 Vert]

I used Vacuum Orna Metal in Michigan.

[1109RWHP]

Thanks everyone for the replies. I will check them out.

[dashmore]

I've been using GCAR for over 30 years to do mine. Great prices, exceptional quality.

Can you tell me what GCAR stands for?

Thanks,
Dan

[FL SAAC]

Can you tell me what GCAR stands for?

Thanks,
Dan

GCAR they are very good but seems very busy turn around time 8-9 months

We specialize in the quality repair, rechroming and refinishing of your 60's and 70's era muscle car plastic interior trim. Late model and import vehicles as well.

From O.E. spec's to custom work. With over 30 years of experience in the automotive restoration field.

GCAR Plastic chrome, vacuum metalize plating
https://www.gcartrim.com/

[1109RWHP]

Just Dashes told me they are not doing plastic plating at the moment.

[SFM5S000]

For small pieces this stuff works real well especially for pieces that you don't touch or handle too much. It's available on Amazon! $10 bucks

Cheers,
~Earl J

[Bob Gaines]

For small pieces this stuff works real well especially for pieces that you don't touch or handle too much. It's available on Amazon! $10 bucks

Cheers,
~Earl J

I got some and have used it . Good stuff but don't have unrealistic expectations for anything but very small touch up sections. Not a plastic part but it can make a night and day difference on the tarnished front vent window pivot of 65-68's.

[FL SAAC]

Try Phillip's plating out of Wisconsin

Or

Speed and sport out in Texas

Hopefully both are still in business and haven't bitten the dust

Best of luck in your endeavors

[dashmore]

For small pieces this stuff works real well especially for pieces that you don't touch or handle too much. It's available on Amazon! $10 bucks

Cheers,
~Earl J

I got some and have used it . Good stuff but don't have unrealistic expectations for anything but very small touch

up sections. Not a plastic part but it can make a night and day difference on the tarnished front vent window pivot of 65-68's.

Ive used these as well.  I concur with Bob's assessment.  They worked really well on the front edges of 1970 ball shaped AC vents. 

Dan

[Royce Peterson]

I used Vacuum Orna Metal in Michigan.

Me too. I used Just dashes in New Jersey the time before and they offered slower service and a higher price. The folks at Vaccuum Orna Metal were better in every way. 1-800-827-6762