Original Driveshaft Value?

[Johnkn]

Greetings,

I've got what I suspect is the original driveshaft from 6S383 (I sold the car a few years ago).  Does it have any value (here or to the K-code guys) or does it get cut up and recycled?  The car was converted to a T5Z prior to my ownership.

Thanks....


.

[J_Speegle]

It likely does especially if its not pitted and does not need rebalancing since often drive line shops remove original weights and replace them with different ones.

[Bob Gaines]

Internal clip driveshaft (65/66)components are hard to find now days and consequently have value.

[6s1640]

It also has value if the yokes have not warn out and the u-joints are tight.  I have an original drive line but the forward end yoke is warn out.  The u-joint cap can be rotated in the yoke.  Do I cut off the warn yoke and have a better yoke welled on or just have another drive line shortened?

Best of luck

Cory

[hertzz350]

Its worn.......