News:

We have implemented a Photo Gallery for hosting images right here on SAACFORUM. Check the How-To in News from HQ

Main Menu

Rare NOS Rotunda head lights FoMoCo script R12-B

Started by alex74pd184, March 06, 2023, 05:14:49 PM

Previous topic - Next topic

alex74pd184

NOS Rotunda bulbs, three-prong,  4002 low-beams each in its original box, shook each bulb and no rattles, never been powered up or installed. These bulbs have the etched "FoMoCo" logo in the centers and have the small "TS" logo cast into the bottom of the glass.

Bulbs are now listed in Ebay

Bob Gaines

 Are these the smaller 4002 low beam for the 4 bulb system or the larger size bulbs for the two bulb system? I can't distinguish size from the picture.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

Bob Gaines

Will you power up bulbs to confirm working order?
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

Bob Gaines

Middle pole is neutral . The pole on ether side will light high or low.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

Bob Gaines

Quote from: alex74pd184 on March 06, 2023, 10:06:18 PM
I'll have to look into that too. If I remember correctly, the top center would get a red wire (low beam) function, right side would get green wires(high beam) and the left side would get black wires to ground?
For testing negative to center. Positive to ether side will light ether high or low. They both don't have to be on at the same time to confirm that they work like in a working car situation.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby