News:

SPECIAL NOTICE - See SAAC-50 Forum for DATE CHANGE for SAAC-50

Main Menu

66 GT350 radiator

Started by 69mach351w, June 03, 2019, 05:59:58 PM

Previous topic - Next topic

69mach351w

Was the C6ZE A2 radiator used in the 350's?

And would the date be somewhere around 11 65?

Bob Gaines

Quote from: 69mach351w on June 03, 2019, 05:59:58 PM
Was the C6ZE A2 radiator used in the 350's?

And would the date be somewhere around 11 65?
I don't think so . I have not seen or heard of that radiator being used on a GT350 from the factory. It may be for a 6cyl . The inlet and outlet are typically a smaller diameter on 6cyl. That observation may help eliminate the 6cyl possibility.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

gt350hr

  +1
     I have only seen C4ZE top tanks well into 66 dates. I don't recall seeing a C6ZE with the W MO on it.
   Randy
Celebrating 46 years of drag racing 6S477 and no end in sight.

J_Speegle

Quote from: gt350hr on June 04, 2019, 10:55:52 AM
I don't recall seeing a C6ZE with the W MO on it.

Non-Shelby application but an example from a 11-65 marked one





The top tank - if dated 11-65 could be used to make a GT350 radiator if you could locate the rest of the parts since the ID tag is available as a reproduction  and that info was not stamped in the top tank by Nov 65 radiator production.  My records suggests that a very small group of 66 GT350's received radiators dated for November 
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

gt350hr

   Thanks Jeff,
       I was thinking in terms of the C6ZE stamped into the top tank which I have never seen  , not the soldered on plate as in your picture.
   Randy
Celebrating 46 years of drag racing 6S477 and no end in sight.

J_Speegle

Quote from: gt350hr on June 05, 2019, 11:27:40 AM
   Thanks Jeff,
       I was thinking in terms of the C6ZE stamped into the top tank which I have never seen  , not the soldered on plate as in your picture.
   Randy

Understand - by Nov the tank stamped ID would have been gone. That's right about the change over from what I can tell
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

69mach351w

Thanks for info guys. It does have the W HO letters as well. I know of one but was wanting to see first if it was used in the 66 350's and second if anyone here would need it. But sounds likely 350's didn't use them much.

Bob Gaines

#7
Quote from: 69mach351w on June 05, 2019, 09:18:36 PM
Thanks for info guys. It does have the W HO letters as well. I know of one but was wanting to see first if it was used in the 66 350's and second if anyone here would need it. But sounds likely 350's didn't use them much.
The letters are W MO . MO is short Modine which is the radiator MFG.  GT350's didn't use a radiator with the C6ZE-B2 or A2 tag at all. The date was what Jeff was referring to he had seen used on a few Shelby's. 
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

69mach351w

Actually meant to type "M". Fat fingers once again😆

It's an A2 with 11 65 date.

Bob Gaines

Quote from: 69mach351w on June 06, 2019, 05:09:45 AM
Actually meant to type "M". Fat fingers once again😆

It's an A2 with 11 65 date.
Been there done that.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

gt350hr

  The W is for "western"  meaning the Modine manufacturing plant here in California. W MO should be on ALL '65-66 ( same size) and 67 ( larger) radiators.
Celebrating 46 years of drag racing 6S477 and no end in sight.