News:

SAAC Member Badges are NOW available. Make your request through https://saac.wildapricot.org  to validate membership.

Main Menu

NORS Tan Distributor Cap

Started by s2ms, June 07, 2026, 01:10:13 PM

Previous topic - Next topic

s2ms

Period NORS Filko FO-100HD tan cap, same as Ford B7AZ-12106-A, Autolite/Motorcraft DH-146, very rare performance part that's been obsolete for many years. Don't know much about these except that they were originally used with transistorized ignition. IIRC Randy Gillis(RIP) was a fan of using them. $150 OBO which includes USA shipping.

Please PM or email if interested.

Thanks,
Dave





Dave - 6S1757

JohnSlack

Randy preferred those du to the better material.

s2ms

#2
Thanks John. This is also heavier, ~9oz, compared to a regular cap which is ~6oz.
Dave - 6S1757

TA Coupe

All of those brass contacts compared to aluminum ones that a lot of caps have nowadays will contribute to that difference in weight.

     Roy
If it starts it's streetable.
Overkill is just enough.

s2ms

Good point, I did use an NOS Motorcraft DH-6 cap with aluminum contacts for the comparison. The Filko cap actually has copper contacts except center post which is brass. I do have a few Filko FO-100 standard black caps (copper contacts) which weighed in at ~7oz.
Dave - 6S1757

JohnSlack

Quote from: TA Coupe on June 07, 2026, 04:57:14 PMAll of those brass contacts compared to aluminum ones that a lot of caps have nowadays will contribute to that difference in weight.

    Roy

Yes, the one Randy liked were made from Alkyd polymers also.

csxsfm

How do these compare to the early Accel?