News:

SAAC Member Badges are NOW available. Make your request through saac.memberlodge.com to validate membership.

Main Menu

1967 GT500 TRANSMISSION FOUND 7RO2Q192784 RUG-S1

Started by George, September 27, 2020, 05:13:12 PM

Previous topic - Next topic

George

Recently found a 1967 GT500 4 Speed ,RUG-S1 with 1967 GT500 VIN # Stamped on bottom 9RO2Q192784, located In south eastern PA.

Would like to see if car is still out there ??

                                   George    215-378-7493

GT350DAVE

No known owner. Believed to have been parted out.
Dave
Support the SAAC Registry


shelbydoug

A '67 would need a 7 as the first character in the code.

What would a '69 Q code 4 speed be from? Sounds strange?
68 GT350 Lives Matter!

shelbymann1970

Quote from: shelbydoug on September 28, 2020, 07:31:59 AM
A '67 would need a 7 as the first character in the code.

What would a '69 Q code 4 speed be from? Sounds strange?
a non ram air CJ car(Q-code 428 CJ/SCJ).There are 9R02Qxxxxxx 69 Mustangs out there.  But the S1 wasn't available in a 69. RUG-AE2 if that is what you meant by being strange. Gary
Shelby owner since 1984
SAAC member since 1990
1970 GT350 4 speed(owned since 1985).
  MCA gold 2003(not anymore)
1969 Mach1 428SCJ 4 speed R-code (owned since 2013)
"2nd" owner of 68 GT500 #1626

DC-DD

Quote from: shelbydoug on September 28, 2020, 07:31:59 AM
A '67 would need a 7 as the first character in the code.

What would a '69 Q code 4 speed be from? Sounds strange?
Quote from: shelbymann1970 on September 28, 2020, 08:57:40 AM
Quote from: shelbydoug on September 28, 2020, 07:31:59 AM
A '67 would need a 7 as the first character in the code.

What would a '69 Q code 4 speed be from? Sounds strange?
a non ram air CJ car(Q-code 428 CJ/SCJ).There are 9R02Qxxxxxx 69 Mustangs out there.  But the S1 wasn't available in a 69. RUG-AE2 if that is what you meant by being strange. Gary
Quote from: Shelbypat on September 27, 2020, 08:49:46 PM
9 or 7 first letter ?


The original heading says  7R   and lists as a S1   
Do not over think it the 9 would be  a typo  as we all know there is no RUG S 1   by 69

69mach351w


DC-DD


J_Speegle

Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

69mach351w

Ooops Lol, I should've been more specific. Yes I know this is a Shelby forum, but I meant just regular 67 Mustang codes.

And I don't think we're talking about Mercury's here.

shelbymann1970

Quote from: 69mach351w on September 28, 2020, 05:14:03 PM
Ooops Lol, I should've been more specific. Yes I know this is a Shelby forum, but I meant just regular 67 Mustang codes.

And I don't think we're talking about Mercury's here.
and 67 reg BB mustangs didn't have transmissions stamped either. 
Shelby owner since 1984
SAAC member since 1990
1970 GT350 4 speed(owned since 1985).
  MCA gold 2003(not anymore)
1969 Mach1 428SCJ 4 speed R-code (owned since 2013)
"2nd" owner of 68 GT500 #1626

shelbymann1970

#11
Quote from: DC-DD on September 28, 2020, 12:21:16 PM
Quote from: shelbydoug on September 28, 2020, 07:31:59 AM
A '67 would need a 7 as the first character in the code.

What would a '69 Q code 4 speed be from? Sounds strange?
Quote from: shelbymann1970 on September 28, 2020, 08:57:40 AM
Quote from: shelbydoug on September 28, 2020, 07:31:59 AM
A '67 would need a 7 as the first character in the code.

What would a '69 Q code 4 speed be from? Sounds strange?
a non ram air CJ car(Q-code 428 CJ/SCJ).There are 9R02Qxxxxxx 69 Mustangs out there.  But the S1 wasn't available in a 69. RUG-AE2 if that is what you meant by being strange. Gary
Quote from: Shelbypat on September 27, 2020, 08:49:46 PM
9 or 7 first letter ?


The original heading says  7R   and lists as a S1   
Do not over think it the 9 would be  a typo  as we all know there is no RUG S 1   by 69
My point is that he thought a Q for 69 was strange. Not a typo but a Q for 69 is what I thought and why I asked.  I have owned my fair share of Q-code 69s but more R-codes. Gary
Shelby owner since 1984
SAAC member since 1990
1970 GT350 4 speed(owned since 1985).
  MCA gold 2003(not anymore)
1969 Mach1 428SCJ 4 speed R-code (owned since 2013)
"2nd" owner of 68 GT500 #1626

J_Speegle

#12
Quote from: shelbymann1970 on September 29, 2020, 02:25:43 PMand 67 reg BB mustangs didn't have transmissions stamped either.

Have received some reports and pictures of it happening at San Jose  and have examples of K code transmissions from other plants
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge