Valve cover spreader bars for a late GT350

[joephil]

Hi Joe, you can also try this dimensioned drawing.
Cory

Cory, this picture is incredibly helpful, thank you so much for all the measurements and their accuracy.

What is the exact thickness and is it the same for the 3 different types of valve cover spreaders?

[6s1640]

Hi Joe,

Glad to help. I added one dimension to the end of the curved spanner bar 3/32 radius on the end. I measured the thickness at .094 inches. This is a little under 12 gauge steel. Best of luck.
Cory

[silverton_ford]

This post is related and may be useful to reference for other questions - https://www.saac.com/forum/index.php?topic=235.msg867#msg867

Here is Brant's blog on the ones he made years ago - http://blog.virginiaclassicmustang.com/2014/05/cobra-valve-cover-hold-down-tab-set.html

[joephil]

Hi Joe,

Glad to help. I added one dimension to the end of the curved spanner bar 3/32 radius on the end. I measured the thickness at .094 inches. This is a little under 12 gauge steel. Best of luck.
Cory

Thanks again, Cory, I'm going to start making them.
I'll post the results.

[98SVT - was 06GT]

For SB Ford - https://www.summitracing.com/parts/sum-g3435?seid=srese1&gclid=CjwKCAjwspPOBhB9EiwATFbi5APOAUHaxMyznCxVW-rzUDp84ZqF9l8czE2Ub1JAhrIYQmc5gHaoPxoCNUwQAvD_BwE