News:

We have implemented a Photo Gallery for hosting images right here on SAACFORUM. Check the How-To in News from HQ

Main Menu

GT500 radio bezel removal

Started by rdmgt500, April 04, 2024, 09:11:27 PM

Previous topic - Next topic

rdmgt500

Does the console need to come out to remove the radio bezel? Unless I'm doing something wrong, there doesn't seem to be enough clearance for the 2 protruding bolts on the back side of the bottom part of the bezel to clear the console.

Shelbypat

#1
Top of console only and it clear.

Patrick

rdmgt500

Thanks Patrick. What's the trick to remove (or back up an inch or 2) the top part?

Shelbypat

#3
Remove the ashtray, remove the 2 screws  and pull the top part rearward as there are fragile clips at front.

Patrick

shelbymann1970

Quote from: Shelbypat on April 05, 2024, 07:16:33 AM
Remove the ashtray, remove the 2 screws  and pull the top part rearward as there are fragile clips at front.

Patrick
+1 and have done it too many times to count.
Shelby owner since 1984
SAAC member since 1990
1970 GT350 4 speed(owned since 1985).
  MCA gold 2003(not anymore)
1969 Mach1 428SCJ 4 speed R-code (owned since 2013)
"2nd" owner of 68 GT500 #1626