Messages

I have owned many 65-68 Toploader shifter assemblies , rods, levers over the years.
I have never seen a stamped number on any 65-68 Mustang linkage rods until now.
Does anyone know if this 3-4 rod is just basic run of the mill, or if its something special or desirable?
This is a 68 Big block shifter.

I should also note the center to center spacing on the 2 holes for the bottom of the stick is 2.00" not the basic 1.800" .
Did all 68 shifters use 2" center to center spacing , or was this a big block only thing? I was told it may be 68KR only?
Any info is good info, thanks

sorry no complete sets, just some extra rods.
(3) 3-4 rods, and reverse rod

I have one with a mid 68 date code if you get desperate.
I can check actual date if needed

I have a 4279 , Off by 1 digit 

Snakebite, Which transmission do you have?
I have a decent amount of factory rods and levers

I cant tell you, but it does look like a small letter intake casting
without any numbers or letters , maybe its a sample / test run?

Thanks for the quick replies.
Do any of these numbers relate to what I have?

C2AZ-9A589-E
C3AZ-9A589-C
C8AE-9A589-F

I am trying to properly identify this factory bake lite or phenolic carb spacer.
Any info is greatly appreciated.

thank you both for the replies

I am not too familiar with all the exact details on 65/66 shelbys , I have these and Im trying to figure out what this style steering wheel center would have come on? has Ford number C6OA-3655-A

This center is for use with the factory "Deluxe interior" Mustang style wheel,
Did any 65-66 shelbys come with the Deluxe style wheel? Is this correct for 66 GT350-H ?
When I google for images,  im seeing a few different types of steering wheels on 65-66 shelbys.

thank you in advance

thanks for the replies.
So if I understand them correctly , if it has the re inforcment bar its later 67, and if it doesnt (regardless of numbers on it) its correct for all 65 to early 67 ?.

The reason I ask , I have original 67 rotors , dust shields, caliper brackets , master cylinder and booster and have at least 3 sets of calipers and all the calipers are slightly different from each other, and trying to pick the most correct calipers to make this set up correct.

thank you

and this is one on right
caliper on right ,  reinforcment bar in center of small half unreadable number maybe 71312 ? , 71315 on big half.

trying to properly identify these 2 different calipers.
caliper on left #56977 in center of small half, K/H unreadable number on big half.
no other numbers or date codes found.

is style on left correct for 65 - 66 and style on right correct for 67

It looks like I have the cooler you need.

Ill send you a private message

pics added