Topics

WTB: NOS Shelby Letters (deck lid, header panel)
Interested in quality single or complete sets. 
Not looking for NOS with poor finish.
Needed to complete a 1968 restoration.

Any information is appreciated.
Thank you
Fran

Interior Plastic Sail Panel Window Surround:

Any progress on a quality reproduction that has the appropriate grain to match the original design?

If not..
Has anyone had good results repairing originals?

Thank you
Fran

Looking for sources for a new wiring harness to repair my original tachometer.
(3 wire. Red, Blk, Blu (Blu/Red Stripe)
I could splice the wiring, but I'd prefer to correct and connect it properly.
Any information is appreciated.

Thank you
Fran

For Sale new reproduction wires from Kevin Marti.
I received these in error by using the vehicle selection drop down from their website.
(KM site still has this issue. )

Unfortunately they are dated wrong for my my GT 500KR.  These are dated 4Q-67.
I didn't check the date initially and tossed the original bag.  They are now in a 2Q68 bag.
They would not accept returns for opened packages.   
New, never used.   
Selling at $45 or best offer.

SOLD!!!!
Thank you for all of the inquiries..

Wanted 1966 Magnum 500 Wheel, original wheel with correct offsets and stamping marks.
No rim damage or significant rust.
Thank you.
Fran

Selling my extra : The Shelby American Magazines & Snakebites. (see photos for issue #s)

These were part of a large collection purchased a few years ago.

Downsizing my library
The condition of the magazines is quite good. Some of the snake bites have discoloration from storage.
No obvious pen markings...
I'd like to sell them all together.
Price is $150
Shipping is extra. approx 22 lbs.
Possible delivery to Spring Carlisle. 
 
let me know if you'd like additional photos or information.
Thank you
Fran

Would build dates and casting dates of these transmissions be based on the car build date?

Typically 1-3 weeks before the car assembly date, or would this vary based on these transmissions being unique to the GT350? 
Possibly they were built in batches and wouldn't follow what is typical of "standard mustang K code sub assemblies".

Thanks
Fran

Wanted for 1968 Shelby:
Original 1968 "factory line" fog light.
Only need 1, lens assembly only.
England. No E11.
Few Small pits ok, less is preferred.
lamp reflector must be good. 
Unit will be sanded and polished.

Thank you
Fran

Sourced.  Thanks.

Looking for advice on how to identify a correct spare tire steel rim for a later production car with 14 inch rims

Correct for what Ford installed at the SanJose Plant. 

Identification marks, offset, welded, riveted...
Any information is appreciated.
Thank you

Fran

Wanted: 1968 Mustang rear bumper? used.
Searching for a dated rear bumper. Great core candidate for new chrome.
No pits or previous damage.
1967 dated also acceptable.
Prefer stamp dates prior July 29 1968.

Thank you
Fran

Looking for original black liner. 
Just realized my original part has a hole in the corner.
Not sure how to repair..

See attached photo of mine.

1968 Shelby
License Bracket S8MS 17A385A prefer NOS, lightly used ok

Front Grill Brackets, Upper Outside S8MS 8217-A
Qty 2 prefer NOS, lightly used ok

Shelby Automotive door sill emblem S8MS 6310130-A NOS

Bucket Seat Back, very good used condition.

1967, 68 Mustang & Various LH door handle, interior C7AZ-5422601-B NOS with quality chrome.  No longer looking... Sourced.

Trying not to use reproduction parts. 
Thank you

Fran

I sourced 1968 GT500KR hoses (428cj) from Marti Auto, but they are stamped Autolite.
The banding on these hoses does look to be correct type for production line

I pulled out the hoses that came on the car, and they a stamped Fomoco, with the single line rectangular outline. 
I believe that is more typical of what came on cars from NJ.

Correct?
Any assistance is appreciated for guidance on a source .
Attached is a photo of the upper hose.
Thank you
Fran

Selling my duplicate new in the box SAAC Registries.

Shelby American World Registry 1987
$100 + shipping

Cobra, GT 350, GT500 Registry 1982
$100 + shipping

Updated 2/6/26
Reduced to $75 + shipping for each
Possible delivery to Spring Carlisle.

Wanted: 1968.5 428CJ Mustang exhaust manifold. Original. Early design.

Needed to possibly replace my original passenger side manifold (Casting Number C8OE 9430 B
Fomoco 2 )that has a machining issue.
Will buy both sides, but only need the passenger side.

Thank you
Fran

No longer needed.   I was able to address the issue with my original manifold yesterday  :-)
Thank you .

Shipping cost is additional $
All items are NOS, unless noted differently

C9ZZ 6687 B  Oil Pan Windage Tray
Ford 1969-1970 Boss 302 + 289 HiPo $175
No hardware included.

C5AF 10A352 H Alternator Pulley. $225
Ford 289 HiPo

S1MS 9431 C Exhaust Header Flange Kit $325
Ford 1965-1966 GT350. Complete

S1MS  3590 A Steering Pitman Arm $425
Ford 1965-1966 GT -350

C8AZ 1190 A Front Inner Wheel Seals. Have 3, $10 ea.
Ford 1965-1967 Mustang + 1965-1967 GT-350

S1MS 5260 A3A Header Flange Gasket, Have 2 $65 each
Ford 1965-1966 GT-350

S1MS 16229 A Rear ID Plate "GT-350". $175
Ford 1965-1966. * some damage.

C5ZZ 11654 A Head Light Switch $125
Autolite Before 8/17/64 1965 Mustang + GT-350

C5ZZ 13220 C Right Side Parking Light Retainer $70
Pkg of 1 Ford 1965-1966 Mustang + GT-350

C5ZZ 13221 C Left Side Parking Light Retainer $70 each
Pkg of 2 Ford 1965-1966 Mustang + GT-350

C5ZZ 13221 C Left Side Parking Light Retainer $70
Ford 1965-1966 Mustang + 1965-1966 GT-350

C5ZZ 2457 B Clutch Pedal Pad $35
From 3/8/1965 1965-1967 GT-350 SOLD

C5ZZ 6522053 B Mustang Ignition Key Blanks, have 8, $23 each
Ford 1965-1966 Mustang + GT-350

BF-42 Spark Plugs (Box of 10) $70
Motorcraft

S7MS 16098.   $85
1967 GT500 Fender Emblem

S9MS 16098 A
1969-70. "SHELBY" Grill Emblems. Have 2. $125 each SOLD

S7MS 9A031 A. Gas Cap Emblem. $135
1967-68 GT350

C3DZ 8149 B 289 HiPo ((K Code)
Fan Shroud Brackets
Only located 3
Correct for 1965, 1966 Mustang & GT350
$150 for all 3.

Photos available on request.
Listing these for another club member.

Thank you.
Fran

Wanted: NOS wheel emblem. Early original design that has the correct hash marking, cobra details and placement.
S8MS-3649-A

Thank you
Fran

Wanted: Looking for qty 2 C7ZB-15533-A gaskets. Only grey type.
Might consider used based on condition.
Thank you
Fran

Wanted: looking for 2 NOS S8MS-6310130-A
Shelby Automotive Sill Plates for 1968
Shelby.

Thank you
Fran

Searching for either Autolite or Motorcraft NOS

Autolite/Motorcraft Part Number is A8AZ-8575-C. (RT-9)
Any help is appreciated.

Sourced a superstant


Thank you
Fran