Messages

Hello all;  I know this is a longshot, but I am on the hunt for an original 1966 Shelby rear package shelf.  I am restoring an original rear shelf car (a carryover 66), and would love to find an original shelf.   Thank you in advance.  I can be reached at 5419736211 (Oregon).

Here is a photo of Talbert's car at the same event.

Great video!  Thanks for sharing Brian! At the 11:13 mark, you can see the #3 (of 16) Group II Trans Am Shelby Coupe that was purchased by Peter Talbert.  On the Shelby invoice for this car, it shows that it was sent from SA to Camp Stoneman, in Pittsburg California for an SCCA race (this event), along with the Flip Top Cobra.  This was Talbert's first race in the car.  The sponsorship on the rear quarter panels for this race was Hayward Ford.  On the front fenders, was a small decal with Talbert's newly started publication, "Motorsport International".  It is my understanding that the magazine only lasted about 6 issues.  I restored that car for the current owner who has owned it for 41 years!  It is still vintage raced.

As we all know, the auctions can provide us with some guidance as to a vehicles value, but sometimes, things are not as they seem.  I was involved in the private sale of a concourse Carryover '66 GT350 that sold for over $300k in 2018.  Unfortunately, these private sales often go unnoticed to the big companies that evaluate the market.  On the other hand....maybe that is a good thing!

Ken

This is on Los Angeles CL

https://losangeles.craigslist.org/lgb/pts/d/lakewood-shelby-mustang-transmission/7263485154.html

Ken

There was a 67 XL "R" Code Fairlane on Facebook several days ago under the Fairlane parts and cars for sale page.  I think it was $59k.  Engine was out, looked to be original paint, which was very faded with surface rust.  Excellent interior. 

According to the "Mustang Production Guide" by Jim Smart and Jim Haskell, as Bill stated, the first Mustangs built at Dearborn as 1965 models (alternator charging system instead of generators) were built starting August 1st, 1964 and started with VIN number 250000.  This car is listed in the registry section of that book.  The authors also state that the "often published and believed" transition date for 65 production was August 17, 1964 although they show August 1st as the date that production began.  It is my opinion that this may very well be a show unit or promo car.  Sounds very cool!

Ken

Oooops....Just realized its a VF...Sorry

Hello;

I have an unrestored D3ZF-CA distributor.  $40.00 shipped to you.

Let me know if this is what you are looking for.

Thanks!

Ken Mann
541-973-6211

I posted last November that I am in need of a pair of Hi Po 289 heads (Sept.,1966), for a two-digit 67 GT350.  I was given some help from a few members (thank you!) and am now widening my search to include July or August of 1966 dates.  Any leads would be appreciated.  My good friend is about to start the restoration and has the original block, but is lacking a pair of cylinder heads.

Ken Mann
541-973-6211

Looking for a pair of nice 289 Hi Po heads for a two-digit 1967 GT350.  Dated September of 1966.  Thanks!

Ken Mann

Might as well throw my hat in to the ring.....I am recalling these results from memory, because I am having trouble logging in to Russo and Steele, but in 2015 at Russo and Steele, Monterey, 6S213 was auctioned off, and I believe that the hammer price was $295k.  In 2017, at RS Monterey, 6S250 sold for a hammer price of $300k.  Maybe someone here can log in and either confirm or disprove these results.  Either way, I am guessing that even with it's shortcomings, 6S061 will bring close to this money. 

Thanks Bob, I will try to post photos of the ends of the bar so we can identify.  Any idea who supplied the 1 inch bars to Ford/Shelby? 

Ken

Gentleman;

It is hitting both strut rods, and one side of the frame rail.  I have 4 other 66's in my shop, and only one, which is a B-Production vintage race car, with an original 1 inch sway bar, shows signs of a very slight interference with the drivers side frame rail.  No interference with the strut rods.  I think that the ride height plays a role in the frame rail interference, but the contact with the strut rods seems to be a product of the curve of the bar, as it exits the bushings and curves rearward.

Thanks for taking the time Bob.

Ken

Hi all;

Working on a 66 Carryover car, and noticed a slight interference between the front sway bar and the strut rods, as well as the front frame rail on one side, where the rail is notched.  At first, we thought maybe we had a 67 sway bar on there, but after a lot of research, we are convinced that we have the correct 65 - 66 1 inch sway bar.  The bar barely hits, but it is enough to make noise.  After some research, we also learned that there was at least one Shelby that went back for warranty repair, to correct sway bar interference with the frame rail, and a ride height adjustment as well (which would help this issue).  This car has the original hi po front coils in it (I cleaned them and found the reddish-brown stripes on them).  I have two questions for the group;  first, has anyone had these problems, and second, who was the original supplier of sway bars to SA?  Thanks in advance for the help.

Ken