News:

SAAC Member Badges are NOW available. Make your request through saac.memberlodge.com to validate membership.

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - fastpace

#1
Up For Auction / Re: Barrett-jackson
July 26, 2022, 07:10:28 PM
All this does is keep car enthusiasts from getting hassled like the case of the Corvette in Kansas listed in the article.  The original law nor the updated law really has any effect on the people swapping VINs.  In the end, it's down to a purchaser to make sure that have done sufficient homework and validation to ensure the car is what they're expecting.  If the numbers, parts, and paperwork aren't sufficient enough to a buyer to prove to them the car is what it is and worth the extra money, then they should move on to the next one.
#2
I'm surprised it didn't sell.  Outside of the historic factor to it, there's maybe some usable parts.  To build it into something bigger, like potentially trying to build it into a cobra, I don't think would make it any more valuable than a continuation car at most and you could end up down a very long road fabricating parts for the specific chassis.
#3
Up For Auction / Re: 8T02S14338401385 on BAT
July 19, 2022, 04:26:19 PM
Was more than I expected given the long and costly path ahead.  Wish BaT had a good way to reach out to the buyer, would like to be in touch with them and see the path they end up taking as have a very similar path ahead on a future 68 GT500 project.
#4
Up For Auction / Re: 8T02S14338401385 on BAT
July 13, 2022, 06:25:37 PM
Will be interesting to see what it brings as you really don't see too many Shelby projects anymore which are this complete.
#5
CSX 2000 Series / Re: CSX2410 - from Barn to Concourse
December 23, 2021, 10:12:37 AM
Quote from: Cobra Ned on December 23, 2021, 08:44:15 AM
As I am sure you are aware, a certain amount of the tubing on the front of that chassis does not belong.

Yes, unfortunately at some point someone attempted to do some of their own repair work in preparation for mounting the fiberglass body and getting the car back on the road, which included some questionable welding and repairs.   
#6
CSX 2000 Series / Re: CSX2410 - from Barn to Concourse
December 22, 2021, 06:16:57 PM
Quote from: shelbydoug on December 22, 2021, 03:23:00 PM
I can understand why you would want to return it to "stock". I'd be SO tempted to put an FIA body on it.

I see the engine even has the Autolite carb on it!

I would need serious counseling. Maybe med's to stop me.

Like I said, "best of luck" on this one.  ;)

If it was 20 years ago, there would have been a strong chance it would get an FIA body on it.  However, today with the values it's really tough to make a major deviation from original.  I also find it to be quite interesting and unique going to Princess Blue, red interior, silver wire wheels, street body, luggage rack, radio, and white side walls.  It's how a lot of the cars were built and sold, but most know them for what they were quickly turned into as the track performers. 

CSX2410 is not much different from the others during the time.  You can see the picture from Bill Currence in 1968 which he had repainted to a darker Guardsman Blue (he commented he didn't like the light blue and a small fender bender turned into full repaint), removed the antenna, removed the luggage rack, removed the white walls, and installed drag race headers with cutouts out the side.
#7
CSX 2000 Series / Re: CSX2410 - from Barn to Concourse
December 22, 2021, 02:15:15 PM
Quote from: 68countrysedan on December 22, 2021, 01:33:17 PM
Very very cool.

Question: The car was heavily damaged in an accident and wound up with a fiberglass body.

Any details on who the manfacturer was and how was it fitted to the existing structure?

We believe the body is likely made by Allied.  The body was purchased in the late 60s/early 70s and so far they're the only ones I have heard had made fiberglass bodies at the time.  I had someone reach out who had been in contact with the person who originally made them, and only 3 were made and they had located 2 of them.  This would line up as well since Allied was in Pennsylvania which is in the couple hundred mile radius of where the car has spent its whole life.

The body was never fully fitted, just rested on top of the structure.  We still have the body and its in very good shape considering its age.  The fiberglass is much thinner and more pliable than the bodies made today.  At some point, we will get around to it and will plan to list the body for sale or otherwise it will be turned to garage art to go with the story of the car.

Quote from: EdwardGT350 on December 22, 2021, 02:00:35 PM
the 1965 trade by Willian Currence jr for the cobra, i assume the GTO was a pontiac and not a ferrari!?

Yes, Pontiac GTO.  Bill was active military at the time and also owned a Semi-comp and a 427 street during the late 60s/early 70s.  He no longer owns any of the cars, but have been discussing with him to collect any information on any of the cars to be able assemble history for 2410 along with any current owners of the other cars.
#8
CSX 2000 Series / Re: CSX2410 - from Barn to Concourse
December 22, 2021, 12:05:09 PM
Quote from: Coralsnake on December 22, 2021, 11:51:23 AM
Willing to provide any technical information I can on the GT500 restoration.

www.thecoralsnake.com

The GT500 is going to have to wait at least a year.  The positives on its side is that it's 1 owner, fully complete, and ran when parked in the mid-70s with 34k miles on it.  The downside is that it wasn't stored well during that time and will require at least the front floor pans replaced based on very initial assessment at the body condition level.  In the end, we would like to complete a concourse restoration with it as it has the completeness and condition to properly do so but taking it on concurrently with the Cobra just isn't feasible.

Quote from: Cobrask8 on December 22, 2021, 11:52:36 AM
I very much enjoyed talking with you and your family about the car before you had it sent to the restoration shop. And meeting the both of you at the Shelby Cars & Coffee! I hope any advice I gave will help.

I too will eagerly watch this restoration!

Dan Reiter
Lehigh Valley PA Region

Dan, unfortunately missed you when we stopped through at the Lehigh Valley show in September, but I know he enjoyed catching up at the Cars and Coffee.  We will definitely keep in touch, and if you remember keep him in the loop on local events and gatherings and I'm sure he'd enjoy getting more active in the club.
#9
CSX 2000 Series / Re: CSX2410 - from Barn to Concourse
December 22, 2021, 11:58:57 AM
December 22nd Update

One thing that will probably never stop is the continuous searching and sourcing of original correct parts.  Quite a few key pieces that were missing have been sourced, with the most critical being the body which was ordered through David Kirkham and is currently en-route across the Atlantic.

A few other parts so far include a spare Motorola 324-TC which will be used along with a Cobra radio purchased from Dave Wagner to ensure we have a working original accessory.  While the radio is basically useless, it does offer and interesting talking point and was originally optioned to the car.




We were lucky to locate a spare C3OF-12127-D distributor with matching date code 3MB to our original which had been found by someone who purchased a storage unit at auction.  This particular distributor looks to have seen very little use and still had its original FoMoCo cap installed.




While the bigger work of frame and body repair is being completed, we're working concurrently to start the restoration of some of the smaller accessories to have them ready during reassembly.  One of the first items is the gauges.  2410 was missing its speedometer and had an incorrect oil pressure gauge installed, but all other gauges remained.  A NOS Stewart Warner D-353-Z oil pressure sender and a spare Stewart Warner D-362-N temp sender were sourced to complete the full package.  As you can see in the picture a comparison of the original 362-Y versus the replacement 362-N temp sender.  The steel nut 362-Y are near impossible to find and while we have both originals from oil and coolant temp for 2410, the oil temp sender has been damaged and while we navigate its repair we wanted to ensure we have a backup plan.  The 362-N sender with slight modification can be made to appear and operate the same as original.



#10
CSX 2000 Series / Re: CSX2410 - from Barn to Concourse
December 22, 2021, 11:42:03 AM
Quote from: Royce Peterson on December 22, 2021, 11:33:31 AM
Looks like a great project!

Question - any history on the photo showing the 1968 Cougar XR-7 towing the Cobra chassis? Looking at the cars in the driveways across the street it appears there is a 1969 Pontiac GTO next to a 1975 - ish Pontiac LeMans four door sedan. The Cougar is wearing larger than stock tires and wheels and is sporting 6.5 Litre emblems on the fender, indicating a 390 engine.

The picture is from Oct 3rd 1973 when my FiL purchased the car.  The picture was taken and provided to us by Sam Peoples who he had purchased the car from.  It's at Sams house at the time in Aliquippa, PA so the cars across are his neighbors who he mentioned were into cars as well.  He believes he has video of the car being pulled away and is still on the hunt for it.

I will have to ask my FiL on the Cougar, but from our past discussion he honestly doesn't remember too much about the car.  He has a very sharp memory, but the Cougar at the time for him was his "regular" car.  He purchased the Cougar to be able to stop putting the miles on his 1968 GT500 which he was the original owner on and still owns today (will start a complete different thread on that car at some point, but it needs full restoration).
#11
CSX 2000 Series / Re: CSX2410 - from Barn to Concourse
December 22, 2021, 11:16:53 AM
November 11th Update

Through early November, Vintage Motorcar Company has fully disassembled the car, inventoried parts, walnut shell blasted the frame, and sprayed a quick primer coat to protect it. 

CSX2410 frame sitting next to CSX2125




Part of the reason for our selection of VMC is their organization and detail.  Each part is bagged and tagged to not just include the where the part goes, but important details like thread type and dimensions.



A few spots have been found and cleaned up with original Princess Blue paint for sample to mix from.


#12
CSX 2000 Series / Re: CSX2410 - from Barn to Concourse
December 22, 2021, 11:16:22 AM
Initial State

While the body is missing, the car is disassembled, and the panels look rough, CSX2410 has maintained a significant portion of its original components and hardware.  Luckily, as parts were removed in the late 60s, whoever disassembled did a fairly good job of reinstalling or tying parts together to keep that hard to find original British hardware with components.






The engine long block documents as original to the car, including correct 1964 C4OE-B cylinder heads and C5OE-9425-A intake.  It still features it's original sheetmetal oil pan with hap-hazard oil temp sensor installed with brazing.  Most accessories are still with the car including the 3623S fuel pump with Eelco elbow, distributor, ignition coil, and others.




#13
CSX 2000 Series / Re: CSX2410 - from Barn to Concourse
December 22, 2021, 11:15:55 AM
History

CSX2410 was originally Princess Blue with Red Interior and Class "A" Accessories to include white side wall tires and luggage rack, antifreeze, radio, and antenna
-   1964, September 18 – Invoiced to Universal Motor Co, Richmond, VA
-   1965, June – Universal Motor Co wrote to Shelby America asking for help selling a Cobra which they had in inventory since October and requested tax refund similar to being offered on other Ford vehicles.
-   1965 – An unknown original purchaser, a doctor who only briefly owned the vehicle before realizing a Cobra wasn't the car for him
-   1965 – William Currence Jr traded a 1966 GTO plus cash to the original owner for the car
-   1966 – Car involved in minor fender bender, repainted Guardsman Blue during repair
-   1967, Late – The car was wrecked causing significant damage ruining the body and ultimately being the last time the car was driving
-   *unknown events, was potentially sold amongst family and friends of William Currence Jr as noted by William*
-   1971,  October 15 – Title reissued back to William Currence Jr
-   1972, August 19 – Purchased by Samuel Peoples Jr for $2600.  Condition at time of purchase was non-running, fairly complete with fiberglass body.  After owning the car for about a year, and only removing the fiberglass body, engine, and trans, Sam had decided the car was going to be a significant amount of work and didn't have the time amongst other projects.
-   1973, October 3 – Current owner purchased the car from Samuel Peoples Jr from an ad in the Aliquippa newspaper for $3,000.  The car was flat towed home behind the new owners Mercury Cougar back home.
-   *The car was moved between home garages and then placed in an enclosed trailer in the late 1990s*
-   2021, July 4 – CSX2410 was uncovered from its storage place in an enclosed trailer where it had sat for the last ~23 years.  Initial investigation and inventory pictures taken to embark on a restoration.
-   2021, September 28 – After reviewing several shops, the car was picked up by John Bassler and the team at Vintage Motorcar Company to start the restoration

During the time while CSX2410 was roadworthy, some modifications were made to include Shelby America Belanger drag race headers and rear Koni Special D Shocks (March 1965 date code).  With these modifications, William Currence Jr regularly auto-crossed the car around WV.



#14
CSX 2000 Series / CSX2410 - from Barn to Concourse
December 22, 2021, 11:15:24 AM
We're finally to a point that I think it would be good to start a build log for CSX2410 restoration which is being completed by Vintage Motorcar Company in Inwood, WV.  I will give fair warning, but I tend to get very heavy into the details so the posts will be long, but hopefully informative.  The whereabouts of this car have been unknown by the Cobra community since 1972, during which time it has been owned and stored by my father in law.  In July 2021 after quite a bit of discussion with my wife and him, we unearthed the car to determine a path forward to bring it back to it's former glory.  In general, the car has been sitting since he pulled the car home on October 3rd, 1973 behind his Mercury Cougar until September 28, 2021 when VMC came to pickup the car to start the restoration.

The plan for the car is to restore it back to original Shelby America specification at a concourse level.  We plan to restore as much of the original parts as possible, utilizing NOS or original used parts where possible, and then when needed using or making reproduction parts scrutinizing details and modifying when necessary.

If you have spare original parts which you might be interested to sell with the intent for them to be used in the correct rebuild of a CSX2000 series car, please contact me.



#15
Nice find, does look to be a 1963 289 fuel pump 3623S.  According to Bob Mannels book it was used on both HiPo and non-HiPo 289s for 1963 and then changed to the 3732S and 3734S in 1964.  However, to be correct for a 289 Cobra it would still need the Eelco elbow which can be more rare than the pump itself.  This was the same case for the pump which was listed by magmustangs on ebay which is referenced in the listing.