SAAC Member Badges are NOW available. Make your request through to validate membership.

Main Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Topics - Jbarela

Wanted to Buy / 66 hipo drive shaft
March 18, 2024, 01:03:50 AM
I am looking for an original 66 hipo drive shaft. Money is burning a hole in my pocket..

Thanks in advance guys.
Wanted to Buy / Webbers!!!
March 13, 2024, 02:22:55 AM
I need 48IDA or 48IDA1 or a combination of those two in the 600-1200 serial number range. Italy made
1965 GT350/R-Model / Brake drums
June 30, 2023, 03:20:06 AM
I can't find my notes.. I have a 4k dated diff, what would be the approximate car build date? Also would this rear end have the 65 drums with the three nubs or the later 66 style?
Thanks forecourt help.
Parts For Sale / 65 horn switches
February 12, 2023, 03:13:40 PM
Plastic thread..2650
Metal thread..1850
Appeals / Clunk out of rear end when shifting
May 07, 2022, 08:45:50 PM
Hey there, the 66 is starting to clunk when I am slow on the clutch, slow dump kind of. Crawled under the car, the diff is leaking and I can turn the drive line back and forth with about 1/4 inch of play when in that normal?
Up For Auction / Hone o drive 9inch 411 to 298
February 12, 2022, 12:57:50 PM
Not mine but saw it on my FB page. $7000 Seller is Robin Miller
1965 GT350/R-Model / 5S183
February 01, 2022, 12:01:45 AM
Looking for owner of #183 if anyone can put me in contact
Appeals / References for Delta Bay Mustang
January 21, 2022, 11:51:48 PM
Does anyone know if Delta Bay Mustang in Brentwood is still in business? I want to take the shelby and have door glass replaced with NOS pieces. I am in the bay area and they seem to be the closest to me. I call and email and no response.

1965 GT350/R-Model / 65 roll bar
October 21, 2021, 12:15:29 AM
Just picked up a roll bar and threw it in the car to see how it fits. Looks like the seat brackets need to be removed. Anyone have pictures to share of the welds to the floor.
1965 GT350/R-Model / 65 shelby rear brakes
July 08, 2021, 05:46:29 PM
Hello all, getting ready to put my rear end togethter. I have a nice diagram of the rear brake part numbers. The diagram is short of the KH part numbers that are stamped in the parts. I am trying to find correct K/H emergency brake parts. I keep searching for 10" parts but find the same parts with different KH numbers and they all claim they are for ford 10 inch brakes.

Does anyone have some pics of there parts and numbers or this info accurately recorded?

Thanks in advance!
Hello all, getting so close now to assemble my rear end. I am looking for some original K/H rear brake hardware for both sides. Looking for non pitted pieces or already restored pieces. I see stuff on ebay but dont trust that arena. So I need the e-brake arms, the e-brake links and brake adjusters.
Wanted to Buy / 65 66 NOS Door seals
June 22, 2021, 12:49:44 PM
911 on this set. These are the little square rubber seals on the side of the door above the latch where the window and door meet. Evan consider a super nice mint used original set. Thanks guys!
1966 Shelby GT350/GT350H / Radiator help
June 07, 2021, 12:49:45 PM
Hey all trying to get the car ready for july, our car overheats with the rebuilt 2 core, I read that I might have over painted it causing problems with heat transfer. Swapped in a three core and no problems overheating, yes I did not paint that one lol. I am convinced I over painted it as I cant imagine that the car would overheat always with the two core. My question is can I get away with a three core or is that a few points deducted? Also with a three core does everything still bolt up without issue like the fan shroud, how about fan clearance? Thanks in advance!
1966 Shelby GT350/GT350H / Correct Solenoid?
April 26, 2021, 01:21:12 AM
Hey there all, need some help and pics I guess are always nice. I need a solenoid for our car but I dont have any reference as to what was original to even start looking for one. An eyesore in the engine compartment I want to fix. Thanks!
Wanted to Buy / 65 steering wheel
April 21, 2021, 10:59:17 PM
Does anyone have a complete 16 inch steering wheel set up or 15 inch set up? Or hub only or what do you have??
1965 GT350/R-Model / Aluminum steering wheel hub.
April 19, 2021, 12:08:27 AM
Hey all, was the aluminum steering wheel hub only used on the 16 inch split spoke wheels? Can someone please post pics of an original aluminum hub, front and back please.
Appeals / Help finding a member
April 18, 2021, 09:24:09 AM
Hey there, does any one have Dee Marvins' contact info, the email I have on file from 2013 does not work anymore. you can pm me. THanks
Wanted to Buy / 66 black kick panels
April 14, 2021, 02:00:41 AM
Looking for a NOS set or super mint originals. Thanks.
1965 GT350/R-Model / 65 horn toggle switch
April 06, 2021, 04:06:16 PM
Hello all, working with another member here on this.
Need some information and possible pics please. Would like some pictures of both plastic and metal thread switches, need to know what the thread size is for both switches also. Measurements taken of the switch handle as well. Thank you all.
So excited, look what came in the mail today!! Going to send my housing off to get painted now!! What color black should I look for to paint the housing? It's currently powder coated but going to be stripped.
Now I Just need to find correct backing plates and drums!