Topics

I have a pair of NOS left and right rear splash shields for the front fenders on a 65 66 Mustang or Shelby. These are brand new with the Ford sticker still on the part. These parts are in excellent condition. Price is $135 for the pair. Email gandcmurphy@rogers.com if interested.

I have an silver frost 66 Mustang convert for sale. The VIN # is 6F08C150830. It has red standard interior with radio, console and black power top. It is powered by a 289 C code motor that purrs like a kitten and fires right up. It is stopped by discs up front and drums on the rear. The car also has 4 style steel wheels. This car is an older restoration and would just be considered a driver car. The interior is nice but is showing some small signs of wear. The dash looks good and it shows just over 40,000 miles on the speedometer. I am not sure if this is original or not. The body is solid but will need attention as it will need a couple of blow ins and some touch ups. If interested, email gandcmurphy@rogers.com for more pictures or call nine 0 five seven seven 4 2 8 five six. Price is $22,900.Thanks.

I have some NOS Mustang/Shelby parts for sale. Just about all of the parts are in there original packaging or they have the Ford sticker with part number on them. All parts are in excellent condition. Here is a list of what I have:

1)  NOS fuel filler neck fits 65-66. C5ZZ-9034-B. Price is $125.  SOLD
2)  NOS clutch release lever dust shield. C3OZ-7513-A. Price is $20.
3)  NOS convertible sun visor bracket, left and right side. C5ZZ-7C04144-  . Price is $140 for the pair.
4)  NOS sail panel lamp assembly. Only one side. Price is $90.
5)  NOS 289 fender emblem. One side only. Price is $45.
6)  NOS Autolite and Motorcraft headlight switch. C5ZZ-11654-A. Price is $80.
7)  NOS Autolite safety switch #368. C4AZ-7A247-C. Price is $90.
  NOS 64.5 Mustang fender emblems for front fenders. These are the short ones. Price is $50 for pair.
9)  NOS MUSTANG 2+2 fender emblems. C5ZZ-16098-C.  Price is $70 for the pair.
10) NOS 65-70 Mustang brake light switch. Price is $35.
11) NOS PCV valve. C5ZZ-6A666-A Price is $20.
12) NOS Autolite FB-14 gas filter.  C5UZ-9155-A.  Price is 25.
13) NOS Autolite FG-15 fuel filter. C5AZ-9155-B. Price is $100
14)  NOS "FORD" letters for hood. C4OZ-6240282-A,B,C,D.  Price is $100.

Check part numbers for your use. Shipping is extra on all items. Email gandcmurphy@rogers.com for pictures. Thanks.

I have a pair of 67 Mustang calipers that need rebuilding. The pistons are seized inside the caliper. Who can I get to rebuild these calipers. Thanks in advance for any help you can provide.

Hi, can anyone tell me the paint code for 67 Mustang black interior built at Metuchen in May of 67 ?  Thanks in advance for any help......Greg.

I have a beautiful full set of wheel well chrome for sale. These are all in there original packaging and come with mounting hardware in 3 of the 4 packages. It has a C7ZZ part number on each package. This will fit on a 67 68 Mustang or a 68 Shelby. These pieces are in excellent condition. Price is $950 plus shipping for all 4 pieces. If interested, email gandcmurphy@rogers.com   Thanks.

I have a 68.5 Mustang or a 68 Shelby carburetor for sale The air horn on the carb is stamped C8OF-9510-AB, LIST 4168 and a date code of 863. The metering blocks are correct also. Everything on the carb moves freely. This carb will need rebuilding as it has been sitting for a long time. Price on the carb is $2700 plus shipping. if interested, email gandcmurphy@rogers.com Thanks.

I have a 66 Shelby carb for sale. This is an early carb as it does not have a S2MS number on it. This one is stamped LIST 3259 and below that is DATE 581. This carb was probably used on a early car after the carryover cars. Someone put an automatic choke on the carb so it will have to be removed. Everything moves freely on the carb. The metering block numbers are 4756 and 4560. Price is $2500 plus shipping. If interested, email gandcmurphy@rogers.com  Thanks.

I have a NOS rad support that will fit a 67 Mustang or Shelby for sale. The rad support has light rust scattered around it. Other than that, there is no damage anywhere. Price is $550 plus shipping. If interested, email gandcmurphy@rogers.com Thanks.

I have a used 66-67 Shelby Cobra intake for sale. The intake has been cleaned by previous owner and is in nice condition. The cover is still on the bottom of the intake. Price is $1100 plus shipping. Email gandcmurphy@rogers.com if interested. Thanks.

I have a used automatic shifter handle for a 68 Shelby. It is in nice condition. Price is $750 plus shipping. Email gandcmurphy@rogers.com if interested. Thanks.

I have a pair of 68 Shelby Lucas fog lites for sale. The chrome is in very good condition. The ends have been cut off on each wire so they will need to be spliced back on. The glass is good and says Lucas on the front and the housings themselves have a nice reflective finish. The price is $800 for the pair. If interested, email gandcmurphy@rogers.com Thanks.

I have a NOS front passenger side battery apron for sale that will fit a 67 or 68 Mustang or Shelby. The apron has a couple of small rust spots on it from sitting around all this time. The Ford part # is C7ZZ-16054-A on the sticker. This is an overall very good NOS part. Price is $500 plus shipping. Email gandcmurphy@rogers.com if interested.

I have a set of 4 '67 Shelby hubcaps for sale. These hubcaps are in driver condition as they have the odd bit of pitting and some light road rash that will need to be sanded. I have additional pictures if interested. Price for the 4 hubcaps is $650 plus shipping. Email gandcmurphy@rogers.com if interested. Thanks.

Hi,

Does anyone have Gary Underwoods email address. I have a question regarding the '67 coupes that were used as race cars. Thanks in advance for any help....Greg.

I have four original 68 Shelby hubcaps for sale. These hubcaps would be in excellent condition with a little bit of work. They hardly have any curb rash on them. The center sections between the spokes will need painting along with the gray around the lug nuts. With this little bit of work, you could have a near perfect set of hubcaps. Price for the four is $1100 plus shipping. If interested in more pictures, email gandcmurphy@rogers.com  Thanks.

I have a 67-68 Mustang cluster for sale. This cluster has a 200 KPM speedometer and a 6000 RPM tachometer in it. The needles move freely on the tack and the speedo. It would be up to you if you want to restore the gauges. What you see in the pictures is what I have as there is no glass or dials for the cluster it self and no knob on the mileage reset. It also comes with temperature and gasoline gauges. Price is $350 plus shipping. If interested, email gandcmurphy@rogers.com Thanks.

I have a rebuildable carb that fits a 66 Shelby GT350 for sale. This carb is in good condition but will probably need to be rebuilt. Stamped on the air horn is S2MS-9510-A, LIST 3259-1, 933. The date code is not correct for a person who is looking for an original date code carb buy for someone where the date code does not mayyer, this is the perfect carb. Price is $1500 plus shipping. If interested, email gandcmurphy@rogers.com  Thanks.

I have a 68 Shelby GT500 carb for sale. This carb will need some rebuilding. It is missing a few parts such as the flapper for the choke. This carb is stamped on the air horn C8ZX-9510-A, LIST 4129, 832. This is a rare carb that could finish off someone's car. Price is $1400 plus shipping. If interested, email gandcmurphy@rogers.com  Thanks.

I have a 66 Shelby sales brochure for sale. I got this from a guy in Ohio who personally picked it up at the dealership in 1966. This has been kept since that time. The front page is a color picture followed by 6 more colored pictures on the inside. These are all in excellent condition. On the back of the brochure it has the word GO with the Shelby American address under that. Price is $135 plus shipping. If interested, email gandcmurphy@rogers.com Thanks.