News:

We have implemented a Photo Gallery for hosting images right here on SAACFORUM. Check the How-To in News from HQ

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Topics - shelbyhertz66

#1
1966 Shelby GT350/GT350H / ignition problem help
September 28, 2026, 03:38:24 PM
hi All,
So My 66 Shelby had been running fine, then yesterday seemed to start normally but in just a few miles it
started to miss and progressively got much worse i barely made it home and into the garage ,kept stalling and running rough.  I changed the points and condenser and fuel filter, seems to be getting fuel also plugs look sooty 
replaced them still runs terrible , I cranked the engine with the key off and noticed spark at the points? also when it was running the tach is off on the rpms also the timing light doesn't seem to work correctly only flashing
occasionally I checked the timing not long ago and was perfect I am totally lost as to what to check any suggestions would be appreciated.  could a bad coil do any of this?
thanks,
Dave
#2
Hi All
So my 66 Shelby is leaking more than I can live with at the rear main seal time to change it.
This will be done in the car with the 2 pc seal has anyone had consistent good luck with a particular brand
of seal so I don't have to do it twice? I may look at the timing chain as well , the car has 48k original miles
and its probably still the original one. My question is did K codes come with the nylon clad cam gear? if so it probably will need replacing. its been quite a while since since I had my last K code apart.
Thanks much!
#3
Appeals / vendor question
November 08, 2025, 11:12:07 AM
Morning All,
Just wondering if anyone has done business with West Coast Classic Couger?
Of course some Couger parts crossover with Mustangs , so just checking if
anyone had any thoughts on their experience.
thanks!
#4
SAAC-50 / saac 50 question
April 29, 2025, 12:35:54 PM
Hi All,
Its been quite a few years since we attended a SAAC convention and are planning for SAAC 50.
I don't remember if there was a swap meet or parts for sale area. Also none listed in the schedule of events unless I missed it.
Maybe there is not one , but if so would anyone know the day it would be?
thanks and see you there.
Dave
 
#5
Wanted to Buy / 1966 Shelby wanted
April 09, 2025, 09:52:59 AM
Hi All,
I have a friend who is looking for a driver quality 66 Shelby .
the ideal car would be solid driver with its original born with engine, Shelby tag, vin. etc.
Cash works or if you are interested, one or more of the following cars + cash as a trade .
2002 Viper ACR with 11K miles
1969 shelby GT500
1966 Mustang convertible. 
If you have any interest please drop me a personal message with a few details about your car and
I will be happy to pass them along to him.
thanks,
Dave

#6
Hi all,
I was wanting to replace my axle bearings and where am I wrong?
I ordered skf bearing RW 207 CCRA which is supposed to be correct but the I.D. of
the bearing is 1.377 and the axle diameter where it is pressed on is 1.365 obliviously
not going to press on.  could anyone suggest a brand or know what part I need? 
The axle seal seems to be the correct size and I think it will seal , just completely
confused , any help would be greatly appreciated.
Dave
#7
1966 Shelby GT350/GT350H / 1966 Shelby colors
February 08, 2024, 03:26:58 PM
Hi All,
does anyone know the total production breakdown of 1966 Shelby by colors?
it may have been asked before but I don't remember seeing it. It  would be interesting to know.
Mine is sapphire blue just wondering how that color compares to the others.
Thanks,
Dave
#8
Parts For Sale / N.O.S. Autolite 45 plugs
August 24, 2023, 01:41:43 PM
for sale:
Partial case of NOS Autolite 45 resistor spark plugs , they are about 30 + years old.
but in new condition.
The case contains 8 boxes of 8 plugs each.
Asking $100+ shipping for all.
Please send a pm if interested and I can provide photos as needed.
thanks,
Dave
#9
65-67 289  black cobra open letter valve covers. These are very nice aftermarket designed to clear most roller rockers
with gaskets briefly used but in like new cond. NPD gets $212 w/o gaskets
$100 + shipping
I am not good at posting photos but happy to send any desired if requested.
please send  a P.M. if interested.
Thanks,
Dave
#10
Parts For Sale / NOS 65/66 power steering hoses
August 24, 2023, 01:31:11 PM
Hi All,
I have 2 nos power steering hoses for sale one the the pressure hose the other is return.
p/n C5ZZ-3A719-D  ,  C5ZZ-3A713-D  these are ford parts for 65/66 mustang.

Asking $115.00 +shipping for the pair. Please send me a P.M. if you are interested i will provide
necessary photos.
Thanks ,
Dave
#11
Hi All,
  I just noticed a n.o.s center cap for sale and it looks like the
background color behind the logo is black .  I have not ever noticed this,
is that the way they all came?
Thanks
#12
1966 Shelby GT350/GT350H / important FYI
July 19, 2023, 07:33:18 PM
Hi all,
just noticed a 1966 black/gold Hertz tribute car on Ebay that is represented as true
k code but has a Shelby Vin tag 6S514   I would think the real 514's owner might not be
thrilled about this.
#13
CSX 2000 Series / Attn: cobra owner CSX2403
July 02, 2023, 10:42:31 AM
Hello,
I have a newspaper clipping classified ad from the 1979 L.A. Times newspaper.
One of the ads shows cobra CSX2403  for sale.  If you would like a photo of it I would be happy to
send you one. Just drop me a PM.
Dave
#14
Morning all,
So my 66 GT350 is pretty well restored but the leather fobs on the belts
are looking a little tattered  , I have been a little reluctant to touch them as they are
the originals but have thought about restoring the leather what would you do?
Thanks
#15
Morning.
65/66 hipo air cleaner bottom original,( bottom only). good restorable cond. paint chips etc. needs refinishing. Date 5A
$250 or best offer.
65-67 289  black cobra open letter valve covers. These are very nice aftermarket designed to clear most roller rockers
with gaskets briefly used but in like new cond. NPD gets $212 w/o gaskets
$140 + shipping
I am not good at posting photos but happy to send any desired if requested.
please send  a P.M. if interested.
Thanks,
Dave
#16
Hi all,
I am getting ready to sell a few leftover parts and am trying to determine
the value for a original hipo air cleaner bottom (bottom only).  it is marked with I believe to be
5A can't find any other markings  and has the nipple for the hose connection and a dimple is present
on the bottom side as well .  Not trying to get rich just wondering what the price range might be.. I would call it good cond.
but has paint chips etc and needs to be refinished.
thanks.
#17
Hi all,
I am getting ready to sell a few leftover parts and am trying to determine
the market value for a original hipo air cleaner bottom .  it is marked with I believe to be
5A can't find any other markings  and has the nipple for the hose connection and a dimple is present
on the bottom side as well .  Not trying to get rich just wondering about what to ask. I would call it good cond.
but has paint chips etc and needs to be refinished.
thanks.
#18
Hello,
I am trying figure if my temp gage is reading correctly?  It is reading much farther to the hot
than any of the several mustangs and shelbys  I have had have read.  It could be sending unit or thermostat
but what i am wondering is I purchased a laser temperature gun when the engine is fully warmed up
where should I really point it to get an accurate measurement? .
thanks much!
#19
Hi All,
I was wondering if a malfunctioning gage voltage regulator could
cause the gages to read incorrectly i.e. too high or too low.
Thanks for any help.
Dave
#20
Appeals / 1966 shelby spare
October 15, 2022, 06:23:39 PM
Hi all,
so my 66 gt350 came with painted magnum 500 wheels, just wondered
when new did the spare tire have a matching wheel ? or was it just a steel wheel?
Thanks much