News:

We have implemented a Photo Gallery for hosting images right here on SAACFORUM. Check the How-To in News from HQ

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - Mustangmac70

#1
SAAC Forum Discussion Area / Shelby Tach Help
April 15, 2026, 04:10:19 PM
I need some Tach help. I recently got a new to me 9k Shelby tach that I want to put in my 1970 Mustang. According to the seller the tach was never used and the wires are still to length and in great shape. The tach has 4 wires: red, black, green, and white/red or pink.

The red wire should go to a switch that is live when the key is turned to the on position. I found two fuses in the fuse box so I used a fuse tap to connect the red wire. Between the fuse tap and the main wire I put an Inline Fuse Holder with 5A ATM Fuse to protect the tach. I saw this came recommended from one of the big tach companies.

The black wire I grounded to a piece of metal under the dash.

The green wire I ran through the firewall and connected to the distributor side of the coil.

The white wire has not been connected yet, but I think it is for the light.

As soon as I turn the key the tach goes all the way to redline and when the engine is running it just stays there. As soon as I turn the car off and remove the key the tach drops to zero.

Do you know if I did something wrong or maybe the tach is broken and needs to be rebuilt?

Thank you for any help you can offer. I greatly appreciate it.