Are all rear end caps supposed to have 3 philips head screws in the lower portion attaching to 1/4 panel?
chris
Quote from: cbrown on March 14, 2021, 04:39:38 PM
Are all rear end caps supposed to have 3 philips head screws in the lower portion attaching to 1/4 panel?
chris
It depends on when the car was converted. Some early cars have less.
So what about a january built car? 656
chris
Hi Chris, if it helps any, my #772 car with a February completion has 1 phillips head screw per side and they are mounted toward the bottom of the cap right above the lower valance. The later cars I have 1665, 2310, and 2585 all have 3 Phillips screws per side.
Maybe others will chime in with what their earlier cars may have.
George
I'd go with one for a January SA completion car.
here's examples ...
thank you all very much!!
chris
Only 1 on#557.