Text only | Text with Images

SAAC Forum

The Cars => 1968 Shelby GT350/500/500KR => Topic started by: Corey Bowcutt on March 21, 2020, 06:11:03 PM

Title: Spacer/Filter between Booster and Mater cylinder orientation
Post by: Corey Bowcutt on March 21, 2020, 06:11:03 PM
I got my Booster and MC back from refurbishing and ready to reinstall but I can not remember what orientation the spacer/filter between the two units.  Should the filter be on the top or bottom?  I assume bottom but want to make certain before I install.

Thank you,

Corey
Title: Re: Spacer/Filter between Booster and Mater cylinder orientation
Post by: Royce Peterson on March 21, 2020, 07:18:56 PM
Little side up, filter down.

Quote from: Corey Bowcutt on March 21, 2020, 06:11:03 PM
I got my Booster and MC back from refurbishing and ready to reinstall but I can not remember what orientation the spacer/filter between the two units.  Should the filter be on the top or bottom?  I assume bottom but want to make certain before I install.

Thank you,

Corey
Title: Re: Spacer/Filter between Booster and Mater cylinder orientation
Post by: Corey Bowcutt on March 21, 2020, 08:16:31 PM
That is what I figured.  Thank you Royce.
Title: Re: Spacer/Filter between Booster and Mater cylinder orientation
Post by: The Going Thing on March 22, 2020, 01:29:41 PM
Corey: Be sure to make sure the rubber inner boot is seated flush with the face of the booster so it doesn't get cut when you tighten up the master cylinder.
Text only | Text with Images