After waiting over a year to get the high quality USA made Cobra Lemans Covers. I ordered 5 sets and got two. normal cost on these for incorrect sanded finish fins and letters is $485 a set. we make these with concours proper polished fins and letters which is a royal pain to do since they are sanded so rough. loads of time and material which costs about $125 per set to get them right. I have one set available which will go on ebay for $595 pr ifthey dont sell outside ebay this week. First $575 Postpaid We prefer paypal friends and family to our email address (920) 434 3645 jim@shelbyparts.com
Is there something on the cast portion that makes them easier to maintain?
I always ask the customer if they want a light coat of Boe-shield , it stops any oxidation but darkens them up. I normally clean them with straight lacquer thinner.
Jim,
Do you have any of the un-cut version?
Thanks,
Van
I've only done those on a special order basis as the cut version is correct for 67 gT500. and will clear the master cylinder. If you want to pursue id need a deposit as i dont stock uncut versions . call me weekdays or Saturdays 920 434 3645
Last Friday at about noon I saw this ad and picked up the phone to buy a pair. Very surprized to have the UPS delivery van drop them off Saturday, mid-day. Greenbay WI to the south Chicago suburbs in about 24 hours.
And of course, I had to open the box up for a looky-loo. Wow, are they fantastic! What a fabulous detailing was done.
Thanks Jim!