As the ad says 68 1/2 C80E 9425 C Dated March 30 of 68 so it's 8C30. This is a very hard to find date. It has been blasted and painted. Two center valve cover holes some one ran to long of a bolt in. I repaired the very bottom of the hole with jb weld when it was blasted. No other issues is repairs. Shipped UPS grounds it local pickup. If shipped I can not guarantee the paint remains as nice as it is do to shipping . SOLD shipped to lower 48 states .
(https://i.postimg.cc/cJ6xBc7h/IMG-20200216-172526372.jpg) (https://postimg.cc/d7PcqrxZ)
(https://i.postimg.cc/rFWtSqys/IMG-20200216-172752362.jpg) (https://postimg.cc/hfDjnWdR)
(https://i.postimg.cc/522bfmrJ/IMG-20200216-172507039.jpg) (https://postimg.cc/6ygD0Cwb)
(https://i.postimg.cc/BZ50Dy9s/IMG-20200216-172447987.jpg) (https://postimg.cc/vDmkw0ZS)
(https://i.postimg.cc/nc0fSDhP/IMG-20200216-172520857.jpg) (https://postimg.cc/hfzYfhxL)
(https://i.postimg.cc/JnkR942B/IMG-20200216-172610653.jpg) (https://postimg.cc/Vrzyt11Y)
(https://i.postimg.cc/QdzGhZ5g/IMG-20200213-084702675.jpg) (https://postimg.cc/hXV31w2h)
was the heat shield removed prior to glass beading and re-installed?
No I didn't remove it I have no way to reattach it. I have blown it out when it was finished , before I painted it.