Text only | Text with Images

SAAC Forum

The Cars => 1968 Shelby GT350/500/500KR => Topic started by: Corey Bowcutt on February 04, 2020, 12:11:37 PM

Title: 68 Shelby E Brake parts color
Post by: Corey Bowcutt on February 04, 2020, 12:11:37 PM
As I do further clean up under my car I need more info on stock part colors.  I have removed several pieces of the emergency brake system from the undercarriage and am going to grit blast them and want to finish them in a stock color.  I have labeled the parts A thru F instead of trying to name them.  Any help would be appreciated.

Thank you,  Corey
Title: Re: 68 Shelby E Brake parts color
Post by: Coralsnake on February 04, 2020, 01:02:46 PM
They are all bare steel

The nut was likely cad plated, but I would have to check the finish
Title: Re: 68 Shelby E Brake parts color
Post by: Corey Bowcutt on February 04, 2020, 01:05:50 PM
Thank you Pete.
Title: Re: 68 Shelby E Brake parts color
Post by: Bob Gaines on February 04, 2020, 02:11:20 PM
Yes on cad or zinc silver finish on nut.
Title: Re: 68 Shelby E Brake parts color
Post by: Corey Bowcutt on February 04, 2020, 02:13:42 PM
Thank you Bob.
Text only | Text with Images