Print Page - WTB: 4100 Hi-po carb choke bracket

Title: WTB: 4100 Hi-po carb choke bracket
Post by: CharlesTurner on January 26, 2020, 01:42:10 PM

Looking for an original hi-po carb choke bracket. The swivel assy that the cable attaches to. Needed for an original C4OF carb that is missing this piece.

I also need 2 vacuum port brass screw in plugs.

Title: Re: WTB: 4100 Hi-po carb choke bracket
Post by: gt350hr on January 27, 2020, 10:54:28 AM

Charles , I have the lever/cam but no brass plugs. I know where to send it.
Randy

Title: Re: WTB: 4100 Hi-po carb choke bracket
Post by: Dan Case on January 27, 2020, 11:31:12 AM

Quote from: gt350hr on January 27, 2020, 10:54:28 AM
Charles , I have the lever/cam but no brass plugs. I know where to send it.
Randy

I recently reverse engineered the 1964 and later spark vacuum port plug after finding the reproduction was sale was very soft brass and the slot was not near as deep and any of the three originals in carburetors I have.

Drawings available if anybody wants to make some plugs.

SAAC Forum

Deals and Appeals => Wanted to Buy => Topic started by: CharlesTurner on January 26, 2020, 01:42:10 PM