Every once in awhile you run across some used parts that are just amazing after 50+ years. I got these from my old Ford dealer friend and he said he had a 67 GT350 back in the day and when the fuel availability on high octane went bad , he put on some lower compression 351 W heads and stuck these on the shelf. They are in superb shape - just check out the pics. They are C7ZE castings with 7B and 7E date codes. Both have the raised #19 in the corners. Never had any port work or milling. Castings were taken apart, stripped to bare including the core plugs for a thorough cleaning. They have been hot tanked. Furnace cleaned, sonofluxed for cracks, run through a very low stress steelbrater to clean then to bare metal and oiled. The seats looks perfect for the next valve job. All the guides look good, virtually pit free. Ready to build for a bone stock GT350 or K code. $2200 as is bare. plus shipping. We can also build these ready to bolt on for $600 with SS valves , new springs and retainers etc we will build a wood crate to ship these at no charge but you have to pay the shipping cost. I have a dozen pictures, if you want more let me know . I saved the original used parts taken off and will go with them when shipped. jim@shelbyparts.com
4 more
last 3