Cobra T10L Aluminum T10 Transmission - New! 289 Cobra/Galaxie Lightweight T10L aluminum transmission . Transmission is new and ready to go. We used one of our last concourse aluminum case and tails which we had made awhile back and saved it for doing a complete transmission . These parts were made using nos originals to make the tooling and were beefed up in areas inside that were always an issue with original transmissions . We have accumulated some very hard to get NOS 2.36 ratio nickel alloy parts to build this. Includes all possible NOS original high nickel parts including nos 26 tooth - 10 spline main drive , close ratio cluster , 1st gear, 2nd gear, 3rd gear - . Also includes super rare NOS Ford original 28 spline main shaft . It took me 5 years to accumulate these rare nos parts. The build includes clearancing gears for better oiling in high performance usage , New Premium Severe Duty bearings. Racing cutback synchros with premium blocking rings. All new small parts and bushings . Blueprinting and assembly by the best T10 guy I know . When have you here is basically an all new Transmission? The only used parts in this trans is the mid plate and the side cover both excellent shape. Original r This type of transmission was used in 289 Cobras and lightweight 1963/4 Galaxie. we will provide the proper crankshaft pilot bushing depending on application. I doubt you will ever see another trans that was built with all these NOS original parts. The shifter assembly is an excellent original unit , the control box has been dis-assembled - cleaned - stripped - mil spec cad plated, re-shimmed , greased with new beehive spring, phosphated pins, new spring washers and clips. Rods are phosphate plated with cad plated levers - new spring washers and clips . No shift handle included! Transmission will be shipped in a custom wood crate with padding inside . First $10,995 , Free shipping with prepaid paypal friends and family or check or wire transfer in USA. CC will pay shipping about $175 in 50 states or pickup up in Green Bay ,WI We also ship worldwide. any questions contact Jim (920) 434 3645 (days) jim@shelbyparts.com check us out www.shelbyparts.com
more pics