'69 Boss 429 KK#1393 hammered at $115K ($126K inc buyer's premium) yesterday at BJ. I remember a good discussion on another thread about '65 GT350s that have been modified/race-prepped and the affect on their values. Is it cost effective for this B9 to be returned to stock condition...or would you keep it as is?
https://www.barrett-jackson.com/Events/Event/Details/1969-FORD-MUSTANG-BOSS-429-232170
Lot #689 - This Royal Maroon Boss 429 is from the first year of Boss 429 production in 1969. It is powered by a Boss 429ci V8 engine, built and balanced by Ross Racing and Restoration. The detailed build of this engine includes an Eagle 521 stroker crank, Eagle H-beam rods, custom JE pistons with Mahle rings, COMP Cams 586 lift hydraulic cam and lifters, Blue Thunder dual-quad aluminum intake, dual 750 cfm carburetors, Mallory distributor with Hi-Fire system, 7-quart rear sump oil pan, high-volume oil pump and water pump, Northern aluminum crossflow radiator and March reduction pulleys with serpentine belt. The engine is backed by a big input shaft close-ratio Toploader 4-speed manual transmission turning a 9" Ford housing with nodular case and a 3.91" Traction-Lok differential. It also features a hood scoop larger than any on a Ford production car up to that time. These cars were specially modified by Kar Kraft in Brighton, MI, to accept the massive Boss 429 engine, however the original Boss 429-specific shock towers and original VIN-stamped front aprons have been removed along with several other Boss 429 items. These items were removed in order to install some upgraded hardware indicative of the serious performance intentions of this car. On top of the Boss 9 engine are twin Weber carburetors, and a Mallory distributor helps keep it in tune. It also has full race RJS safety harnesses complete with SFI tags. The Haneline gauges are in their correct locations. Weld-in subframe connectors and a 4-point roll bar keep things stable when the power is applied, and the suspension has been strengthened with a Panhard bar and Traction Master traction bars. It features front disc brakes for stopping power, a Rod & Customs front suspension and rack & pinion steering. Documented with a Marti Report and two shipping invoices. From The David Maxwell Collection.
Quote from: sfm5 on June 30, 2019, 01:52:40 PM
'69 Boss 429 KK#1393 hammered at $115K ($126K inc buyer's premium) yesterday at BJ. I remember a good discussion on another thread about '65 GT350s that have been modified/race-prepped and the affect on their values. Is it cost effective for this B9 to be returned to stock condition...or would you keep it as is?
https://www.barrett-jackson.com/Events/Event/Details/1969-FORD-MUSTANG-BOSS-429-232170
however the original Boss 429-specific shock towers and original VIN-stamped front aprons have been removed along with several other Boss 429 items. These items were removed in order to install some upgraded hardware indicative of the serious performance intentions of this car.
Would this be the reason for the give away price ? :o
I would at least change the steering wheel. (File under comment; snark)
I dont think you can ever point to a single item to determine the price of a car, especially an auction car. Im sure the lack of numbers contributed greatly after speaking to those present
If the vins are gone you can't title it right??
No Boss 429 shock towers? No Boss 429! To me, that's about 85% of its identity. Except for the towers and the staggered shock plate, everything else bolts on.
Maybe "fairly"priced as a radical replica?Dependent on workmanship..
I think that was a fair price considering it does not have the vin stamped aprons or shock towers. Nice car and I would say the owner is very happy with it. A B9 is a nice car to own in any condition as the engine is worth $30-40K alone.
My point exactly,unless you had a PERFECT donor car ,you would be hard pressed to build it for that...Someone got a cool ride regardless..
On all unibody cars the front aprons are part of the frame; manufactures have to go through crash testing and how they crash and crumple is a safety regulation! When I was a buyer at our Ford store I had to be careful of prior repaired unibody cars; we needed a disclosure of it if we ever were to resale one or in another collision if one got hurt you would be responsible and surely loose a law suit ! Even though this b69 was older in building safety it would make a definite caution and it's value should reflect that !
I agree with 68stangcjfb.
Shaved shock towers? It's a clone/restomod.
To me it's a neat piece but certainly not for purists .
Imagine what a perfect car would bring in the right venue .......
I'm not Boss 429 expert, but the unpainted hood scoop (for a '69), the rear window louvers, and the rear wing would be the obvious signs something was off.
Love the color, and the car is very nice, but now for anything near B9 money.
I'd think the seller did very well.
I thought this Boss looked familiar. I originally saw this car no sale at Mecum Houston in 2018 for $220K; which seemed extremely high (I don't believe it was real money). However, I just did some research, and Houston wasn't the first time it went to auction. Please see below with the corresponding results:
Mecum Auctions
Las Vegas 2017 - SOLD for $200K
Kissimmee 2018 - High Bid of $210K
Houston 2018 - High Bid of $220K
Indy 2018 - High Bid of $170K
Monterey 2018 - High Bid of $150K
Chicago 2018 - High Bid of $150K
Kissimmee 2019 - first run (The first Friday) High Bid of $150K
Kissimmee 2019 - second run (Sunday) SOLD for $165K (all in with fees)
The BJ results from this weekend.
Yes recall seeing it at number of auctions. Fair amount of money spent running it through all of those and getting the car to and from locations and storage but that was someones choice at the time
So regardless of fees the guy lost 35k for the pleasure of owning a boss clone for 2 years??huh.... ::)
According to the list, looks like they just bought it at Kissimmee this year.
Quote from: Shelby_r_b on July 01, 2019, 12:03:48 AM
Mecum Auctions
Las Vegas 2017 - SOLD for $200K
Kissimmee 2018 - High Bid of $210K
Houston 2018 - High Bid of $220K
Indy 2018 - High Bid of $170K
Monterey 2018 - High Bid of $150K
Chicago 2018 - High Bid of $150K
Kissimmee 2019 - first run (The first Friday) High Bid of $150K
Kissimmee 2019 - second run (Sunday) SOLD for $165K (all in with fees)
The BJ results from this weekend.
Ouch...looks like a world of hurt!
Quote from: 557 on July 01, 2019, 06:54:15 AM
So regardless of fees the guy lost 35k for the pleasure of owning a boss clone for 2 years??huh.... ::)
Actually, if you take out the seller's commission paid from the hammer price, the owner received $103,500 from the sale. Subtract that from the price paid (all in) earlier this year of $165K, and the seller lost $61,500 - and that's without shipping costs, entry fees, etc.
He might as well have gone to Vegas or worse yet an (unregulated) Indian casino.... ::)
Suggestion: Somebody borrowed some choice parts then sold the rest......
You know, its been at least 20 years since I've seen a Boss 429 rolling anywhere except on/off a trailer or across an auction stage.
Quote from: roddster on July 01, 2019, 08:00:04 PM
Suggestion: Somebody borrowed some choice parts then sold the rest......
You know, its been at least 20 years since I've seen a Boss 429 rolling anywhere except on/off a trailer or across an auction stage.
I drive mine all the time.
I had it at SAAC Pocono about 4 years ago and was giving rides and doing burnouts.
But granted,....most people don't...
If we can ever get our shit straight and have another convention at WGI or Pocono I'll bring it again.....
Who wants a ride?